FS:92 Civic hatchback Si, Bar’d, Turbo, 5lug, Bride, Comptech, SRR, Blox, TODA Etc...
Thread Starter
Member
Joined: Feb 2004
Posts: 1,044
Likes: 0
From: JDMtown, Ca, USA
FS:92 Civic hatchback Si, Bar’d, Turbo, 5lug, Bride, Comptech, SRR, Blox, TODA Etc...
FORSALE: Original red 1992 Honda Civic Hatchback Si *Clean Title* *Bar’d*
PM me for price or any serious offers
for more detailed pics PM me or Email me
Chasis mileage: 103,000
Engine mileage: around 50,000
Exterior:
-OEM JDM front headlights
-OEM JDM complete rear taillights
-Polyurethane Spoon Sports replica front lip
-Spoon Sports replica sideview mirrors/ Blue tint to reduce glare
-Visions amber replica front turn signals
-Front & Rear OEM mud flaps
-Carbon Fiber Rear spoiler
-Custom license plate re-locater
Interior:
-Bride Zeta II type L w/ memory fab superlow rails (driverside)
-Mint Delsol all black cloth seats (Passenger and Driverside)
-Signal auto detachable hug w/ MOMO adapter
-Authentic Spoon Sports steering wheel (Horn is hooked up and does work)
-C-pillar w/ autometer silver boost gauge, and air/fuel ratio gauge
Suspension/Wheels:
-USDM ITR 5lug conversion
-JDM ITR brake booster and 1in. master cylinder
-Earl’s steel braided brake lines (front and rear)
-ITR GM rims w/ Azenis tires
-Tokico Illuminas 5way adj
-Ground control coilovers
-SRR purple rear lca’s
-Comptech rear tie/sway bar
-EM Racing X-bar, C-pillar, rear upper strut
-JDM ITR front lower sway bar
-Front GSR upper strut bar
Engine:
-JDM B18C gsr (legit come with papers)
-JDM ITR red valvecover
-Blox intake manifold
-Blox titanium retainers
-Blox Dual valvesprings
-Blox throttle body 70mm
-AEM fpr
-TODA timing belt (basically brandnew)
-JDM ITR gold shift linkage
-Energy suspension Polyurethane motor & tranny mount inserts
-Hondata Intakemanifold gasket
-Koyo half-core radiator
-FAL slim fan
Turbo Kit:
SpoolinPerformance GT35R turbo kit
this kit makes good power trust me alot of people can vouch for this kit...
(previous set up at 16psi it made 370whp on stock sleeve stock compression 10.1:1 on 91 octane depending on your motor setup)
-Spoolin ram horn manifold
-Copper exhaust gasket, copper bolts
-Tial 44mm set @ 1 bar 14.7lbs, dump tube, comes with Hallman boost controller
anodized red
-GT35R ball bearing ported shroud version
-Spoolin 3" exhaust cat is elimated
-3" thermal research exhaust
-3" cold side i/c piping
-2.5" backdoor style i/c piping hot side
-Spoolin FMIC 29x9x3 overall size with Tial BOV mounted
core size 21x9x3
-Autometer A/F gauge silver
-Autometer Boost Gauge silver
-GM 3 bar map sensor w/ pigtail
-880 rochester injectors with resistor box
-94-01 cluster dual pod
Will include all vacuum lines
-I/C piping bead rolled, t-bolts, 4" k&n air filter
-Managed with a p28 crome tuned by Redzone its a very good base map, tuning can be arranged with Jeremy from Redzone performance he will be glad to tune your car
(Will NOT part out turbo kit due to everything being custom and made to work together as one installation)
*Very clean and reputable setup*
PM me for price or any serious offers
for more detailed pics PM me or Email me
Chasis mileage: 103,000
Engine mileage: around 50,000
Exterior:
-OEM JDM front headlights
-OEM JDM complete rear taillights
-Polyurethane Spoon Sports replica front lip
-Spoon Sports replica sideview mirrors/ Blue tint to reduce glare
-Visions amber replica front turn signals
-Front & Rear OEM mud flaps
-Carbon Fiber Rear spoiler
-Custom license plate re-locater
Interior:
-Bride Zeta II type L w/ memory fab superlow rails (driverside)
-Mint Delsol all black cloth seats (Passenger and Driverside)
-Signal auto detachable hug w/ MOMO adapter
-Authentic Spoon Sports steering wheel (Horn is hooked up and does work)
-C-pillar w/ autometer silver boost gauge, and air/fuel ratio gauge
Suspension/Wheels:
-USDM ITR 5lug conversion
-JDM ITR brake booster and 1in. master cylinder
-Earl’s steel braided brake lines (front and rear)
-ITR GM rims w/ Azenis tires
-Tokico Illuminas 5way adj
-Ground control coilovers
-SRR purple rear lca’s
-Comptech rear tie/sway bar
-EM Racing X-bar, C-pillar, rear upper strut
-JDM ITR front lower sway bar
-Front GSR upper strut bar
Engine:
-JDM B18C gsr (legit come with papers)
-JDM ITR red valvecover
-Blox intake manifold
-Blox titanium retainers
-Blox Dual valvesprings
-Blox throttle body 70mm
-AEM fpr
-TODA timing belt (basically brandnew)
-JDM ITR gold shift linkage
-Energy suspension Polyurethane motor & tranny mount inserts
-Hondata Intakemanifold gasket
-Koyo half-core radiator
-FAL slim fan
Turbo Kit:
SpoolinPerformance GT35R turbo kit
this kit makes good power trust me alot of people can vouch for this kit...
(previous set up at 16psi it made 370whp on stock sleeve stock compression 10.1:1 on 91 octane depending on your motor setup)
-Spoolin ram horn manifold
-Copper exhaust gasket, copper bolts
-Tial 44mm set @ 1 bar 14.7lbs, dump tube, comes with Hallman boost controller
anodized red
-GT35R ball bearing ported shroud version
-Spoolin 3" exhaust cat is elimated
-3" thermal research exhaust
-3" cold side i/c piping
-2.5" backdoor style i/c piping hot side
-Spoolin FMIC 29x9x3 overall size with Tial BOV mounted
core size 21x9x3
-Autometer A/F gauge silver
-Autometer Boost Gauge silver
-GM 3 bar map sensor w/ pigtail
-880 rochester injectors with resistor box
-94-01 cluster dual pod
Will include all vacuum lines
-I/C piping bead rolled, t-bolts, 4" k&n air filter
-Managed with a p28 crome tuned by Redzone its a very good base map, tuning can be arranged with Jeremy from Redzone performance he will be glad to tune your car
(Will NOT part out turbo kit due to everything being custom and made to work together as one installation)
*Very clean and reputable setup*
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
