Guys we need some help. My Friend just bought an Aluminum Koyo Radiator for his DB8 Integra. Can the Stock Radiator fans of our ITR fit the radiator without any clearance issues on the header? or do we have to buy some after market fans for it? Here are some pictures.
Thanks in advance

 

i think the stock fans should bolt up no problem, but IMO if you have spent a good amount of money on a nice radiator why cheap out on getting some nice fans to finish the setup? just my .02 cents

 

The fans bolt up but you may have some clearance issues. Get some slim fans, theyll look nicer too.

 

Go with flex-a lite... good thin fans.

 

YEAP slim fans will work, I was able to put some FAIL fans it clears my SMSP header by 2cm

 

depends on the type of header you have. I needed slim fans with my hytech header and even with that I needed to bend the AC lines to make it work.

 

Koyo rad + F.A.L. dual fans + Hytech header --- doesn't get any tighter than this

It fits though.

 

Guys thanks for the inputs il explain this to my friend. He has a Spoon 4-1 header so the best bet for it is to go with slim fans.

 

Here is mine, tight as well, notice the ac line is touching the header, I ended up wrapping it with heat wrap and so far so good.

 

AW & BigPhat R : Thanks for the sample pics