December For Sale sticky
Thread Starter
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
December For Sale sticky
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted and you will have % points docked.
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted and you will have % points docked.
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Parting this Car Out - Lots of Great Deals -- Lots of Great Parts !!!!
All Parts are basically brand new, engine and car have only been idled and driven around the parking lot, never been on a dyno or the race track.
For information or to purchase parts:
Phone -- 407-324-4684
Email -- James@IPGParts.com
Pictures will be available upon request as I take them during the disassembly process -- you all know what these parts look like.
1994 Acura Integra RS - JDM Front End Complete Rolling Chassis -- $7800 -
-- Barely seen the sunlight since painted
-- Mazworx 9 Second Legal Cage (needs to be certified)
-- Stroud Parachute Setup
-- Corbeau Seats with Simpson Harnesses
-- Window Net
-- Complete Skunk2 Suspension include Pro-C Coilovers with Drag Spring Rates, Front and Rear Camber Kits, Rear Lower Control Arms
-- Complete Fuel System including Sumped Tank, Aeromotive Pro Filter, Aeromotive A1000 Fuel Pump, -10AN Lines from tank to fuel rail, -6AN Return, Aeromotive FPR
-- Autometer Shift Light with Digital Pro Shift System, AEM Oil Pressure Gauge
-- Battery relocated to the Rear
-- Sparco Flash 5 Steering Wheel with Quick Release
-- DriveShaft Shop Stage 5.9 Axles
(wheels are not included in the price, can be purchased seperately)
Darton Sleeved Assembled B18c1 Shortblock -- sold
-- 84mm CP Pistons with Upgraded Wrist Pins
-- Manley Turbo Tuff Connecting Rods
-- ACL Race Bearings
-- GSR Crankshaft
-- ATI Race Damper
-- Tapped Oil Pan
-- completely assembled from the headgasket to the oil pan, ready for your cylinder head or purchase the one we have available as well !!!
B16 Head with Trevor Johnson Headwork -- sold
-- Skunk2 Pro Series Valve Springs
-- Skunk2 Titanium Retainers
-- Skunk2 STD Size Valves
Skunk2 Pro2+ Camshafts -- $500
T1 Cam Trigger Kit including Sensor, Mount, and Golden Eagle Cam Gear -- $450
Edelbrock B16 Victor X Intake Manifold -- sold
BDL 70mm Billet Throttle Body -- sold
BDL Black Fuel Rail -- $100
RC Engineering 1600cc Injectors -- sold
Peakboost Top Mount T4 Turbo Kit including, T4 Top Mount Exhaust Manifold with Tial 60mm W/G Flange, 4" Downpipe, 3" Intercooler Pipe Kit Tial Flange with Silicone Couplers and T-Bolts, Intercooler Core, Turbo Feed and Return Lines -- $2500
turbo, wastegate, blow off valve not included in price, can be purchased seperately if you like
Intercooler Setup Only -- includes Garrett 24" x 12" x 4.5" core (32" total length including endtanks) -- 3" inlet/outlet, all silicone couplers, all t bolt clamps -- tial 50mm bov flange already in place -- for a top mount turbo setup -- $1350
Peakboost Top Mount Manifold (T4) with 4" Downpipe -- $1350
Garrett GT4294R Turbocharger with 1.01 A/R -- $1500
Tial 60mm Wastegate -- Black -- sold
Tial 50mm BOV, Blow Off Valve -- Black -- sold
Fluidyne 92-95 Civic Half Size Radiator with Slim Electric Fan -- $285
T1 Catch Can Kit, including catch can, filters, fittings, line, and Valve Cover with fittings already installed - bolt on and go !!! -- sold
GSR Transmission with Heat Treated Gears, Liberty Handcuff, Quaife LSD -- sold
Exedy Twin Disc Ceramettalic Clutch -- sold
Golden Eagle Scatter Shield -- $125
Weld 13x8 Magnum Import Drag Wheels, 5" Backspacing with Brand New MT 24.5" Slicks -- $800
Weld 15x3.5 Magnum Import Drag Wheels with Brand New MT 22.5" Tires - sold
NLR AMS-500 Boost Controller -- $325
AEM EMS, Part # 30-1040u (obd1 Civic, Integra, Accord) -- $1350
M&W Pro 10 Ignition with T1 Harness and Crane Coil -- $650
Avid Racing Pro Series Traction Bar Kit for 94-01 Integra, 92-00 Civic -- $250
Innovative Engine Mount Kit with Race Inserts for B Series into 92-95 Civic, 94-01 Integra -- $250
For information or to purchase parts:
Phone -- 407-324-4684
Email -- James@IPGParts.com
All Parts are basically brand new, engine and car have only been idled and driven around the parking lot, never been on a dyno or the race track.
For information or to purchase parts:
Phone -- 407-324-4684
Email -- James@IPGParts.com
Pictures will be available upon request as I take them during the disassembly process -- you all know what these parts look like.
1994 Acura Integra RS - JDM Front End Complete Rolling Chassis -- $7800 -
-- Barely seen the sunlight since painted
-- Mazworx 9 Second Legal Cage (needs to be certified)
-- Stroud Parachute Setup
-- Corbeau Seats with Simpson Harnesses
-- Window Net
-- Complete Skunk2 Suspension include Pro-C Coilovers with Drag Spring Rates, Front and Rear Camber Kits, Rear Lower Control Arms
-- Complete Fuel System including Sumped Tank, Aeromotive Pro Filter, Aeromotive A1000 Fuel Pump, -10AN Lines from tank to fuel rail, -6AN Return, Aeromotive FPR
-- Autometer Shift Light with Digital Pro Shift System, AEM Oil Pressure Gauge
-- Battery relocated to the Rear
-- Sparco Flash 5 Steering Wheel with Quick Release
-- DriveShaft Shop Stage 5.9 Axles
(wheels are not included in the price, can be purchased seperately)
Darton Sleeved Assembled B18c1 Shortblock -- sold
-- 84mm CP Pistons with Upgraded Wrist Pins
-- Manley Turbo Tuff Connecting Rods
-- ACL Race Bearings
-- GSR Crankshaft
-- ATI Race Damper
-- Tapped Oil Pan
-- completely assembled from the headgasket to the oil pan, ready for your cylinder head or purchase the one we have available as well !!!
B16 Head with Trevor Johnson Headwork -- sold
-- Skunk2 Pro Series Valve Springs
-- Skunk2 Titanium Retainers
-- Skunk2 STD Size Valves
Skunk2 Pro2+ Camshafts -- $500
T1 Cam Trigger Kit including Sensor, Mount, and Golden Eagle Cam Gear -- $450
Edelbrock B16 Victor X Intake Manifold -- sold
BDL 70mm Billet Throttle Body -- sold
BDL Black Fuel Rail -- $100
RC Engineering 1600cc Injectors -- sold
Peakboost Top Mount T4 Turbo Kit including, T4 Top Mount Exhaust Manifold with Tial 60mm W/G Flange, 4" Downpipe, 3" Intercooler Pipe Kit Tial Flange with Silicone Couplers and T-Bolts, Intercooler Core, Turbo Feed and Return Lines -- $2500
turbo, wastegate, blow off valve not included in price, can be purchased seperately if you like
Intercooler Setup Only -- includes Garrett 24" x 12" x 4.5" core (32" total length including endtanks) -- 3" inlet/outlet, all silicone couplers, all t bolt clamps -- tial 50mm bov flange already in place -- for a top mount turbo setup -- $1350
Peakboost Top Mount Manifold (T4) with 4" Downpipe -- $1350
Garrett GT4294R Turbocharger with 1.01 A/R -- $1500
Tial 60mm Wastegate -- Black -- sold
Tial 50mm BOV, Blow Off Valve -- Black -- sold
Fluidyne 92-95 Civic Half Size Radiator with Slim Electric Fan -- $285
T1 Catch Can Kit, including catch can, filters, fittings, line, and Valve Cover with fittings already installed - bolt on and go !!! -- sold
GSR Transmission with Heat Treated Gears, Liberty Handcuff, Quaife LSD -- sold
Exedy Twin Disc Ceramettalic Clutch -- sold
Golden Eagle Scatter Shield -- $125
Weld 13x8 Magnum Import Drag Wheels, 5" Backspacing with Brand New MT 24.5" Slicks -- $800
Weld 15x3.5 Magnum Import Drag Wheels with Brand New MT 22.5" Tires - sold
NLR AMS-500 Boost Controller -- $325
AEM EMS, Part # 30-1040u (obd1 Civic, Integra, Accord) -- $1350
M&W Pro 10 Ignition with T1 Harness and Crane Coil -- $650
Avid Racing Pro Series Traction Bar Kit for 94-01 Integra, 92-00 Civic -- $250
Innovative Engine Mount Kit with Race Inserts for B Series into 92-95 Civic, 94-01 Integra -- $250
For information or to purchase parts:
Phone -- 407-324-4684
Email -- James@IPGParts.com
97mm 55main f23a1 crankshaft-$250
SKUNK2 PRO-SERIES 2+ Hseries-$450
H23 crankshaft cyro treated
h23 rods
arp rod bolts
JDM TYPE-S pistons with oem rings
never ran -$500
2 bare GSr heads- $250 each
B16A lsvtec ready head no VC or manifold- $300
jdm b20b with rod knock -100
SKUNK2 PRO-SERIES 2+ Hseries-$450
H23 crankshaft cyro treated
h23 rods
arp rod bolts
JDM TYPE-S pistons with oem rings
never ran -$500
2 bare GSr heads- $250 each
B16A lsvtec ready head no VC or manifold- $300
jdm b20b with rod knock -100
Junior Member
Joined: Apr 2004
Posts: 367
Likes: 0
From: Chicagoland, IL, U.S.A.
Big turbo, 1600cc injectors, PCS Dashlogger, Welds w/tires
Borg Warner S378. Brand new, never used on anything. Bolted to a manifold once just for a picture. T4 exhaust flange, V-band downpipe flange. ~79mm compressor inducer, 1.25 a/r exhaust housing. Not for the faint of heart. Rated to 1150hp but will do more than that. There's a slight dent in the compressor cover lip. Don't know how that got there.
It's the big one in the pictures:
Next to a KO3S:
$2,000 or best offer. I am willing to partial or full trade for engine management, custom fabrication work or some other neat stuff you might have that I might want. PM me and let's talk. I need this gone.
(2) 15x9 Welds w/28" M/T tires on them *~5 passes on them- $750
(4) 1600cc injectors (I believe they are the Bosch style) $280 (shipped to lower 48)
(1) Powertrain Control Solutions Dashlogger - $720 (shipped to lower 48)
I will not separate the wheels/tires. Do not ask.
Reason for sale of these items is I can no longer afford the car as I wanted it to come out. I can trade down + cash if you prefer.
It's the big one in the pictures:
Next to a KO3S:
$2,000 or best offer. I am willing to partial or full trade for engine management, custom fabrication work or some other neat stuff you might have that I might want. PM me and let's talk. I need this gone.
(2) 15x9 Welds w/28" M/T tires on them *~5 passes on them- $750
(4) 1600cc injectors (I believe they are the Bosch style) $280 (shipped to lower 48)
(1) Powertrain Control Solutions Dashlogger - $720 (shipped to lower 48)
I will not separate the wheels/tires. Do not ask.
Reason for sale of these items is I can no longer afford the car as I wanted it to come out. I can trade down + cash if you prefer.
Honda-Tech Member
Joined: Jul 2004
Posts: 244
Likes: 0
From: Around the way
All prices are + shipping.
I'm selling a new Bullseye power S372 (72mm) turbo. Price lowered to $950
Also for sale is a custom IC using a Spearco core 24x12x4.5 $500
Weld Magnum import 15" skinnies(4x100)with 24" tires $500
13" diamond racing wheels(4x100 5" Back space)with MT slicks(8 passes) 24.5x9x13 $300
JG EDELBROCK intake manifold part # 4764 for B16 ($250)
I'm selling a new Bullseye power S372 (72mm) turbo. Price lowered to $950
Also for sale is a custom IC using a Spearco core 24x12x4.5 $500
Weld Magnum import 15" skinnies(4x100)with 24" tires $500
13" diamond racing wheels(4x100 5" Back space)with MT slicks(8 passes) 24.5x9x13 $300
JG EDELBROCK intake manifold part # 4764 for B16 ($250)
Last edited by srt4thatazz; Dec 14, 2008 at 05:07 PM.
FS: MFactory 4.9 Final Drive for B16a2, B18a/b hydro tranny. Will not fit trannies equipped with factory LSD. LIKE NEW: $450 shipped.
Last edited by hatch2wenty2wo; Dec 2, 2008 at 06:20 PM.
Honda-Tech Member
Joined: Dec 2003
Posts: 451
Likes: 0
From: philly, PA, usa
weld import magnums 15x10 4in bs, good condition. 500 shipped to your door! or best offer.
stroud 5lb fire supression system, made by safecraft, brand new never used. comes w/ all lines and fittings 250 shipped to you.
obo
stroud 5lb fire supression system, made by safecraft, brand new never used. comes w/ all lines and fittings 250 shipped to you.
obo
Last edited by denske; Dec 14, 2008 at 11:16 AM. Reason: price lowered
Trending Topics
Honda-Tech Member
Joined: Mar 2004
Posts: 1,554
Likes: 1
From: Vancouver, Wa, US
Prices do not include shipping or Paypal charges unless otherwise stated. I might consider some trades, just let me know what you have to offer. More pictures upon request.
88 Honda CRX SI rolling shell clean title. This car has been family owned, my dad bought the car brand new from a Honda dealership back in 88. What’s all included: NHRA certified chromoly cage, Moroso battery box, Shut off switch, jdm type-r cluster, fake spoon steering wheel, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, tilton master cylinder (car has been converted to hydraulic), wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. $3300.00
CLICK ON PICTURES TO ENHANCE IMAGE
Here is some pictures of when the car was running.
Used Motec M4 with all options unlocked. Comes with data cable, baro sensor, distributor, o2 sensor and the motec Honda harness. Harness is missing a few connectors: est, positive battery, baro,wastegate, map, aux temp. $2600.00 OBO
Set of Bogart wheels with MH Slicks $1000.00
*Frt. 13in wheels 8.7/25-13 MH slicks
*Rear 15in wheels 3.6/24-15 MH DOT Skinnes
Simpson Bandit Helmet Large SA2000 date of MFG:02/05 $250.00
Impact Racing Jacket and Pants size: X-Large SFI 3-2A/5 Approved. $375.00
For more info: http://www.jegs.com/p/Impact+R...02/-1
JDM GSR hydro tranny W/OBX diff. $700.00 FIRM (Pick up only)
B series v-tec NGK spark plug wires W/MSD cap and coil wire $50.00
B series starter $50.00 each
B series half shaft $75.00 each
Complete turbo kit made for a CRX. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo with 4in down pipe and -10 oil return line and -4 feed line, Edelbrock intake manifold (b16 or Type-R head) with 76m Blox T-body, 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3). $3600.00
Complete long block. Motor has very low miles only made it to the track less then 8 times this year. LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. $3500.00
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210
M&W PRO-10 with harness $450.00
MSD Blaster II Coil $125.00
Magnaflow Regulator $140.00
Catch can W/lines & Valve cover. $350.00
Bosch fuel injectors SOLD
Golden Eagle Scatter Shield $160.00
G-Force Window net (date: APR. 08), G-Force Seat belt (date: AUG. 08) G-Force gloves (size: large) $140.00
G-Force Seat belt (Expired) perfect for the passanger seat. $60.00
Custom center console for a 88-91 CRX W/ Auto Meter Gauges (Boost, Oil, Water) and Carbon Fiber switches $175.00
STR fuel rail W/-8 fittings$125.00
AEM Fuel Sensor $100.00
AEM 5 Bar Map Sensor $120.00
Boost Solnoid $120.00
88 Honda CRX SI rolling shell clean title. This car has been family owned, my dad bought the car brand new from a Honda dealership back in 88. What’s all included: NHRA certified chromoly cage, Moroso battery box, Shut off switch, jdm type-r cluster, fake spoon steering wheel, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, tilton master cylinder (car has been converted to hydraulic), wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. $3300.00
CLICK ON PICTURES TO ENHANCE IMAGE
Here is some pictures of when the car was running.
Used Motec M4 with all options unlocked. Comes with data cable, baro sensor, distributor, o2 sensor and the motec Honda harness. Harness is missing a few connectors: est, positive battery, baro,wastegate, map, aux temp. $2600.00 OBO
Set of Bogart wheels with MH Slicks $1000.00
*Frt. 13in wheels 8.7/25-13 MH slicks
*Rear 15in wheels 3.6/24-15 MH DOT Skinnes
Simpson Bandit Helmet Large SA2000 date of MFG:02/05 $250.00
Impact Racing Jacket and Pants size: X-Large SFI 3-2A/5 Approved. $375.00
For more info: http://www.jegs.com/p/Impact+R...02/-1
JDM GSR hydro tranny W/OBX diff. $700.00 FIRM (Pick up only)
B series v-tec NGK spark plug wires W/MSD cap and coil wire $50.00
B series starter $50.00 each
B series half shaft $75.00 each
Complete turbo kit made for a CRX. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo with 4in down pipe and -10 oil return line and -4 feed line, Edelbrock intake manifold (b16 or Type-R head) with 76m Blox T-body, 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3). $3600.00
Complete long block. Motor has very low miles only made it to the track less then 8 times this year. LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. $3500.00
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210
M&W PRO-10 with harness $450.00
MSD Blaster II Coil $125.00
Magnaflow Regulator $140.00
Catch can W/lines & Valve cover. $350.00
Bosch fuel injectors SOLD
Golden Eagle Scatter Shield $160.00
G-Force Window net (date: APR. 08), G-Force Seat belt (date: AUG. 08) G-Force gloves (size: large) $140.00
G-Force Seat belt (Expired) perfect for the passanger seat. $60.00
Custom center console for a 88-91 CRX W/ Auto Meter Gauges (Boost, Oil, Water) and Carbon Fiber switches $175.00
STR fuel rail W/-8 fittings$125.00
AEM Fuel Sensor $100.00
AEM 5 Bar Map Sensor $120.00
Boost Solnoid $120.00
Last edited by WillieWillieFast; Jan 1, 2009 at 06:20 PM.
just call, text or pm 801-628-5084
Parting out my 95 honda civic hatch dx (clean title) sfwd race car. Most of the parts are brand new and have never been installed on the car. My loss is your gain! Parts will be noted below if new or in barely used condition.
Please no trades
There is much much more that is not listed or forgetting
Buyer pays all shipping and 3% PayPal fee
VEHICLE:
95 honda civic hatch dx (clean title) sfwd race car shell graphite gray, Full NHRA certified 8pt chromoly cage, GSR caliper upgrade 8 passes, spc front camber upper control arms, energy suspension urethane kit, Tokico ground control w/ skunk2 springs, Battery shut off, diest parachute cable with handle, Dss stage five hubs and arp extend lugstuds, Stroud window net cert for another yr(brand new!) Full-race fuel sump, digital 6, plx wideband, autometer gauges w/pod omni rear lower control arms
2700.00
ENGINE:
Gsr p72 head ported +polished by golden eagle(brand new!)SOLD!!!
Supertech valvetrain(brand new!)SOLD!!!
Golden Eagle gsr sleeved block 84mm b18c brand new never been started!SOLD!!!
Golden eagle headgasket 84mm(brand new!)SOLD!!!
Greddy kevlar timing belt(brand new!)SOLD!!!
CP pistions(brand new!)SOLD!!!
Manley Rods (brand new!)SOLD!!!
Arp rod bolts(brand new!)SOLD!!!
Black anodized golden eagle fuel rail(brand new!) 110.00
1600CC precision injectors (brand new!) SOLD!!!
Bdl 72mm tb(brand new!) 350.00
Edelbrock intake manifold(brand new!) 290.00
Full-race pro am t4 twin scroll turbo manifold coated SOLD!!!
Tial 44mm wastegates x2 (brand new!)SOLD!!!
Tial 50mm blow off valve(brand new!) SOLD!!!
Garrett GT4294 a/r 1.15 w/flanges(brand new!) SOLD!!!
4" alluminum exhuast rear exit with burns muffler all VbandedSOLD!!!
Moroso catch cans(brand new!) SOLD!!!
Pwr radiator SOLD!!!
Aem 5-bar map sensor 75.00
Avid solid motor mounts(brand new!) 275.00
GSR cams w/stock cam gears 75.00
msd pro cap and rotor SOLD!!!
resistor injector box 40.00
TRANSMISSION:
GSR Transmission (new gears 0 miles brand new!) SOLD!!!
Maxworx scattersheild (brand new!) 125.00
Quaife lsd (brand new!) SOLD!!!
Dss stage five spare axle drive side female bseries 350.00
FUEL SYSTEM:
Full-race fuel sump sold!!!
Aeromotive Eliminator fuel pump SOLD!!!
Aeromotive fuel filters(brand new!) SOLD!!!
Aeromotive Fuel Pressure Regulator (brand new!) SOLD!!!
All stainless lines w/earl fittings SOLD!!!
SUSPENSION:
Full-race Pro AM Traction Bars (brand new!) SOLD!!!
Omni rear lower control arms(brand new!)180.00
Energy suspension urethane kit 100.00
EXTERIOR AND WHEELS:
Simpson parachute SOLD!!!
Spoon style carbon fiber duckbill wing(brand new!) SOLD!!!
2 lips, color matched ctr lip and black urethane mugen 50.00 each
Weld racing wheels 13x8 with anodized black centers w/polished lip mt slicks SOLD
Mickey Thompson 24.5x9x13 slicks 5passes two setsSOLD!!!
5 x 114.3 black w/polished lip 17" rims with yokohama es100 80% tread 275.00
INTERIOR & ELECTRONICS:
Momo steering wheel with quik release nrg hub 195.00
Delsol seats 250.00
Stroud 5pt harness cert for another yr(brand new!) SOLD!!!
Hondata s300 with boost option w/ecu(brand new!)SOLD!!!
PLX wideband
MSD digital 6 (brand new!) 275.00 each
MSD hvc 2 coil(brand new!) SOLD!!!
MSD blaster hvc coil SOLD!!!
Autometer gauges and center vent pod, oil pressure and boost 50.00 for each gauge
Parting out my 95 honda civic hatch dx (clean title) sfwd race car. Most of the parts are brand new and have never been installed on the car. My loss is your gain! Parts will be noted below if new or in barely used condition.
Please no trades
There is much much more that is not listed or forgetting
Buyer pays all shipping and 3% PayPal fee
VEHICLE:
95 honda civic hatch dx (clean title) sfwd race car shell graphite gray, Full NHRA certified 8pt chromoly cage, GSR caliper upgrade 8 passes, spc front camber upper control arms, energy suspension urethane kit, Tokico ground control w/ skunk2 springs, Battery shut off, diest parachute cable with handle, Dss stage five hubs and arp extend lugstuds, Stroud window net cert for another yr(brand new!) Full-race fuel sump, digital 6, plx wideband, autometer gauges w/pod omni rear lower control arms
2700.00
ENGINE:
Gsr p72 head ported +polished by golden eagle(brand new!)SOLD!!!
Supertech valvetrain(brand new!)SOLD!!!
Golden Eagle gsr sleeved block 84mm b18c brand new never been started!SOLD!!!
Golden eagle headgasket 84mm(brand new!)SOLD!!!
Greddy kevlar timing belt(brand new!)SOLD!!!
CP pistions(brand new!)SOLD!!!
Manley Rods (brand new!)SOLD!!!
Arp rod bolts(brand new!)SOLD!!!
Black anodized golden eagle fuel rail(brand new!) 110.00
1600CC precision injectors (brand new!) SOLD!!!
Bdl 72mm tb(brand new!) 350.00
Edelbrock intake manifold(brand new!) 290.00
Full-race pro am t4 twin scroll turbo manifold coated SOLD!!!
Tial 44mm wastegates x2 (brand new!)SOLD!!!
Tial 50mm blow off valve(brand new!) SOLD!!!
Garrett GT4294 a/r 1.15 w/flanges(brand new!) SOLD!!!
4" alluminum exhuast rear exit with burns muffler all VbandedSOLD!!!
Moroso catch cans(brand new!) SOLD!!!
Pwr radiator SOLD!!!
Aem 5-bar map sensor 75.00
Avid solid motor mounts(brand new!) 275.00
GSR cams w/stock cam gears 75.00
msd pro cap and rotor SOLD!!!
resistor injector box 40.00
TRANSMISSION:
GSR Transmission (new gears 0 miles brand new!) SOLD!!!
Maxworx scattersheild (brand new!) 125.00
Quaife lsd (brand new!) SOLD!!!
Dss stage five spare axle drive side female bseries 350.00
FUEL SYSTEM:
Full-race fuel sump sold!!!
Aeromotive Eliminator fuel pump SOLD!!!
Aeromotive fuel filters(brand new!) SOLD!!!
Aeromotive Fuel Pressure Regulator (brand new!) SOLD!!!
All stainless lines w/earl fittings SOLD!!!
SUSPENSION:
Full-race Pro AM Traction Bars (brand new!) SOLD!!!
Omni rear lower control arms(brand new!)180.00
Energy suspension urethane kit 100.00
EXTERIOR AND WHEELS:
Simpson parachute SOLD!!!
Spoon style carbon fiber duckbill wing(brand new!) SOLD!!!
2 lips, color matched ctr lip and black urethane mugen 50.00 each
Weld racing wheels 13x8 with anodized black centers w/polished lip mt slicks SOLD
Mickey Thompson 24.5x9x13 slicks 5passes two setsSOLD!!!
5 x 114.3 black w/polished lip 17" rims with yokohama es100 80% tread 275.00
INTERIOR & ELECTRONICS:
Momo steering wheel with quik release nrg hub 195.00
Delsol seats 250.00
Stroud 5pt harness cert for another yr(brand new!) SOLD!!!
Hondata s300 with boost option w/ecu(brand new!)SOLD!!!
PLX wideband
MSD digital 6 (brand new!) 275.00 each
MSD hvc 2 coil(brand new!) SOLD!!!
MSD blaster hvc coil SOLD!!!
Autometer gauges and center vent pod, oil pressure and boost 50.00 for each gauge
Honda-Tech Member
Joined: Feb 2002
Posts: 13,501
Likes: 0
From: Angeles Crest, so cal
All parts are located near Pasadena, CA and I AM willing to ship.
Roll Bar Padding
- Each piece is 3 Ft. Long
- Black
- Brand new
PRICE: $20 for all 3
************************************************** ************************************************** *********
Turbonetics T-Bolt Clamps
Used for 1 week for my radiator hoses, but i changed back to regular clamps.
PN: 30275-155
Size: 1.69-1.94 in.
Quantity: 6 T-Bolt Clamps
PRICE: $30 PICKED UP OR $35 SHIPPED
*Only 5 are pictured, but there are 6*
************************************************** ************************************************** *********
Legend "Big Brake" kit.
Purchased the Legend set-up from BrakeExpert, but might not need these anymore.
This is complete straight bolt-up for any EG/DC Chassis.
You are getting:
- 2 freshly rebuilt Legend 2-Piston Calipers (Painted gold)
- Milled Brackets
- New 11.8" rotors from an RSX Type-S, redrilled to 4x100
- Fresh brake pads
PRICE: $340 PICKED UP
Roll Bar Padding
- Each piece is 3 Ft. Long
- Black
- Brand new
PRICE: $20 for all 3
************************************************** ************************************************** *********
Turbonetics T-Bolt Clamps
Used for 1 week for my radiator hoses, but i changed back to regular clamps.
PN: 30275-155
Size: 1.69-1.94 in.
Quantity: 6 T-Bolt Clamps
PRICE: $30 PICKED UP OR $35 SHIPPED
*Only 5 are pictured, but there are 6*
************************************************** ************************************************** *********
Legend "Big Brake" kit.
Purchased the Legend set-up from BrakeExpert, but might not need these anymore.
This is complete straight bolt-up for any EG/DC Chassis.
You are getting:
- 2 freshly rebuilt Legend 2-Piston Calipers (Painted gold)
- Milled Brackets
- New 11.8" rotors from an RSX Type-S, redrilled to 4x100
- Fresh brake pads
PRICE: $340 PICKED UP
Guest
Posts: n/a
Liberty gearset w/handcuff. JUST GEARSET.
PM me for ratios, it's set up for a 26 or 28" car.
Velocity stacks for ITB's or an Intake. 3" OD, 1.75" flange OD
100 shipped
Electric 2 5/8 fuel pressure, smaller Nitrous pressure mechanical. Make offers
T1 Hall sensor/harness with half a season on it (less than 20 passes) Make an offer, I'm sure I can find a use for it somewhere if it doesn't go.
Radio for the pits, guy from work pushed it on me and I realized I have no use for it. 50 shipped
Sparco suit, 40 passes in the car with it. Like new. 400 shipped in the US. More pics if you want them. Just PM me.
It's good forever, so buy it and save some cash! lol I need a /15 suit rated for methanol.
SOLD: Kens Kustom Master Cylinders. Both are for sale. I went with an in car pedal assy. so no need for these. Mounted up, and that's all. I may part with the black stainless lines I have for them too if I can't use them. These are located at NRG tech for the rest of this week. If you want them and are local to them I'm sure you can pay down my tab with them and buy them right there lol
SOLD
Progress springs, I think these are 550's. I can do my best to verify that but it's around there. Slight use. Make an offer, should go in a flat rate 13 dollar box.
AFAP Racing T-shirts
Please PM me if you're interested, don't want to clutter it up too much as I'm sure this will already cause a problem lol
PM me for ratios, it's set up for a 26 or 28" car.
Velocity stacks for ITB's or an Intake. 3" OD, 1.75" flange OD
100 shipped
Electric 2 5/8 fuel pressure, smaller Nitrous pressure mechanical. Make offers
T1 Hall sensor/harness with half a season on it (less than 20 passes) Make an offer, I'm sure I can find a use for it somewhere if it doesn't go.
Radio for the pits, guy from work pushed it on me and I realized I have no use for it. 50 shipped
Sparco suit, 40 passes in the car with it. Like new. 400 shipped in the US. More pics if you want them. Just PM me.
It's good forever, so buy it and save some cash! lol I need a /15 suit rated for methanol.
SOLD: Kens Kustom Master Cylinders. Both are for sale. I went with an in car pedal assy. so no need for these. Mounted up, and that's all. I may part with the black stainless lines I have for them too if I can't use them. These are located at NRG tech for the rest of this week. If you want them and are local to them I'm sure you can pay down my tab with them and buy them right there lol
SOLD
Progress springs, I think these are 550's. I can do my best to verify that but it's around there. Slight use. Make an offer, should go in a flat rate 13 dollar box.
AFAP Racing T-shirts
Please PM me if you're interested, don't want to clutter it up too much as I'm sure this will already cause a problem lol
Last edited by rota92; Dec 8, 2008 at 12:53 PM.
Honda-Tech Member
Joined: Dec 2006
Posts: 1,272
Likes: 0
From: NY
TILTON used [lots of life left] hydro bseries twin disk clutch $700 plus shipping
4" steel exhaust system off my delsol w/ vband connection and magnaflow muffler. $250 picked up
precision used 750hp intercooler. $350 plus shipping
aluminum intercooler piping [2.5" hotside, 3" coldside], tbolt clamps, vibrant couplers, flanged for tial 50mm bov. (bov not included) $200 plus shipping
new never used b16 head, skunk2 valve springs, retainers, valves. S&S speed shop [in queens, ny] port/polish. 3 angle valve job. milled .020". new lmas, new valve seals. $1300 plus shipping.
NOS 4fogger direct port nitrous system. complete w/ pressure gauge and bottle warmer. setup for a 120 shot. $550 plus shipping.
newly built darton sleeved ls bottom end 85x89. it comes with new coated WISECO 85mm 9.5:1 pistons, new EAGLE ls rods, knifeedged/balanced/micropolished crank, DARTON sleeves, new ACL race coated bearings, new COMETIC 85mm headgasket. missing oil pan, oil pump, water pump, and timing belt.
selling for $2000 firm.
4" steel exhaust system off my delsol w/ vband connection and magnaflow muffler. $250 picked up
precision used 750hp intercooler. $350 plus shipping
aluminum intercooler piping [2.5" hotside, 3" coldside], tbolt clamps, vibrant couplers, flanged for tial 50mm bov. (bov not included) $200 plus shipping
new never used b16 head, skunk2 valve springs, retainers, valves. S&S speed shop [in queens, ny] port/polish. 3 angle valve job. milled .020". new lmas, new valve seals. $1300 plus shipping.
NOS 4fogger direct port nitrous system. complete w/ pressure gauge and bottle warmer. setup for a 120 shot. $550 plus shipping.
newly built darton sleeved ls bottom end 85x89. it comes with new coated WISECO 85mm 9.5:1 pistons, new EAGLE ls rods, knifeedged/balanced/micropolished crank, DARTON sleeves, new ACL race coated bearings, new COMETIC 85mm headgasket. missing oil pan, oil pump, water pump, and timing belt.
selling for $2000 firm.
Last edited by building boost; Dec 2, 2008 at 06:22 PM.
Honda-Tech Member
Joined: Mar 2001
Posts: 4,136
Likes: 0
From: Hilo, Hawaii
Precision 350hp intercooler, brand new, never used or installed $240 + shipping
InlinePro T3 cast iron manifold, 5 bolt design, brand new, never used or installed $300 + shipping
MSD 2 bar MAP sensor, brand new, never used $45 shipped
MSD Blaster SS coils (2), each used for less than 300 miles, still in great condition $35 + shipping each
Garrett GT2871R, used, unknown mileage (seller told me it was about 5K miles), no shaft play and spins smoothly, .86 A/R, T3 exhaust housing, can provide pics if needed $800 + shipping
PM or email me crxlsi77@yahoo.com if you want anything or have questions about any of the parts. Thanks.
InlinePro T3 cast iron manifold, 5 bolt design, brand new, never used or installed $300 + shipping
MSD 2 bar MAP sensor, brand new, never used $45 shipped
MSD Blaster SS coils (2), each used for less than 300 miles, still in great condition $35 + shipping each
Garrett GT2871R, used, unknown mileage (seller told me it was about 5K miles), no shaft play and spins smoothly, .86 A/R, T3 exhaust housing, can provide pics if needed $800 + shipping
PM or email me crxlsi77@yahoo.com if you want anything or have questions about any of the parts. Thanks.
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Intercooler/pump/ lines = 650.00 shipped
JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain
550.00 Shipped
__________________________________
Jabsco Centrifi-pupy water pump
- for water to air intercooler setup.
- 3/4 inlet and outlet
75.00 - shipped
______________________________
All associated lines/fittings
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped
_____________________________________________
Weld Magnum Drag 2.0
- 15x10
- 4x100 bolt pattern
- 6inch backspace
625.00 shipped/ 575.00 picked up
will sell without centers 525.00 shipped or 475.00 picked up
_______________________________
Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps
_______________________________
* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping
___________________________________
* Billet Aluminum shock tops from Strange Engineering50 shipped
______________________________
* Autometer 3 3/4inch Sport Comp Tach, with mounting bracket 75.00 shipped
____________________________________
Oil Catch can
80 shipped
* fits 1-3/8 filter
* -12 an male bung
* 1/4npt drain/plug
___________________________________
10 inch tall coil springs
* fits 2.5inch shock
* 350lb rate
50 shipped
JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain
550.00 Shipped
__________________________________
Jabsco Centrifi-pupy water pump
- for water to air intercooler setup.
- 3/4 inlet and outlet
75.00 - shipped
______________________________
All associated lines/fittings
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped
_____________________________________________
Weld Magnum Drag 2.0
- 15x10
- 4x100 bolt pattern
- 6inch backspace
625.00 shipped/ 575.00 picked up
will sell without centers 525.00 shipped or 475.00 picked up
_______________________________
Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps
_______________________________
* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping
___________________________________
* Billet Aluminum shock tops from Strange Engineering50 shipped
______________________________
* Autometer 3 3/4inch Sport Comp Tach, with mounting bracket 75.00 shipped
____________________________________
Oil Catch can
80 shipped
* fits 1-3/8 filter
* -12 an male bung
* 1/4npt drain/plug
___________________________________
10 inch tall coil springs
* fits 2.5inch shock
* 350lb rate
50 shipped
Honda-Tech Member
Joined: Sep 2002
Posts: 1,464
Likes: 0
From: houston, tx, usa
These are new axles I have TWO SETS same price both.. 900.00 each set.
Selling this as a complete kit do not want to part out 3200.00 plus shipping..
This kit will make 600hp with no problem.. thanks..
It comes with everything (wiggins clamp,intercooler,1000cc injectors and water lines for turbo which is a GT3582R
All of the parts are coated and new..
BBK 70mm TB 150.00
New Set of Skunk2 PRO1 Cams and GE Cam Gears $550.00
Endyn Cam Gears 125.00
Percison 1000cc injectors 300.00
Hasport Eg mounts 200.00
Fluidamper 200.00
Last edited by jasonp; Dec 4, 2008 at 05:13 PM.
DixielandImports Please
Joined: Apr 2004
Posts: 2,987
Likes: 0
From: Tifton, GA, USA
Have a Brand new 1 Gal Plastic Fuel Cell.
Bought from Summit Racing.
Retail is 115
Looking for 85 Shipped
Also have a Bosch External Fuel Pump
Its rated at 255lph
65 Shipped OBO
Also have a mallory fuel filter
Dont really know much about it.
It needs a new oring but when you buy a new filter it comes with a new oring
25 Shipped
Bought from Summit Racing.
Retail is 115
Looking for 85 Shipped
Also have a Bosch External Fuel Pump
Its rated at 255lph
65 Shipped OBO
Also have a mallory fuel filter
Dont really know much about it.
It needs a new oring but when you buy a new filter it comes with a new oring
25 Shipped
Junior Member
Joined: Aug 2004
Posts: 537
Likes: 0
From: Mount Albert, ON, Canada
Vibrant Timing Belt Tensioner 
Vibrant Timing Belt Tensioner
Brand new in package. Purchased it for my second motor and never used it.
Works on any B-Series engine.
MSRP is $215
$125 + shipping & 3% for Paypal. (BRAND NEW)
Also have a used B-Series Tensioner from my old Motor
$95 + shipping & 3% Paypal (Still in Mint Condition)
Putting a hold on my K-Series EG Project and have a bunch of BRAND NEW parts to sell.
K-Series Fuel Rail in SILVER (Brand New) in Box
$100 Shipped + 3% Paypal
Billet Adjustable Swivel Neck for K Series.
More Info can be found at http://www.k-tuned.com/kthermostat.html
$130 Shipped + 3% Paypal
K Series Waterpump Pump Block Off Plate with Alternator Kit and Belt.
This is the first Kit which K-Tuned Sells on their site @ http://www.k-tuned.com/kwater.html
$180 Shipped + 3% Paypal
K-Tuned K-Swap Traction Bar for 92-01 Civic and 94-01 Integra
** Will also work with D and B Series Cars **
BRAND NEW IN BOX
$280 SHIPPED + 3% Paypal
Vibrant Timing Belt Tensioner
Brand new in package. Purchased it for my second motor and never used it.
Works on any B-Series engine.
MSRP is $215
$125 + shipping & 3% for Paypal. (BRAND NEW)
Also have a used B-Series Tensioner from my old Motor
$95 + shipping & 3% Paypal (Still in Mint Condition)
Putting a hold on my K-Series EG Project and have a bunch of BRAND NEW parts to sell.
K-Series Fuel Rail in SILVER (Brand New) in Box
$100 Shipped + 3% Paypal
Billet Adjustable Swivel Neck for K Series.
More Info can be found at http://www.k-tuned.com/kthermostat.html
$130 Shipped + 3% Paypal
K Series Waterpump Pump Block Off Plate with Alternator Kit and Belt.
This is the first Kit which K-Tuned Sells on their site @ http://www.k-tuned.com/kwater.html
$180 Shipped + 3% Paypal
K-Tuned K-Swap Traction Bar for 92-01 Civic and 94-01 Integra
** Will also work with D and B Series Cars **
BRAND NEW IN BOX
$280 SHIPPED + 3% Paypal
Honda-Tech Member
Joined: Aug 2007
Posts: 846
Likes: 1
From: Fort Worth, TX
** Up for sale is a Full-Race 3'' down pipe For use with B series bottom mount prostreet manifold only. The down pipe is in near perfect condition.
** BRAND NEW GRP aluminum rods for sale for 84.5mm bore. For LS/ B20 motor. 450.00 please add 3% paypal fee's. (Pending)
** Thermal R&D 3'' exhaust for Integra 3 door F/S exhaust was cut at the circle indicated to add the additional 3'' pipe to reach the down pipe. This is great for a full 3'' turbo exhaust, no need for test pipe.
** F/S TiAl used 50mm BOV comes with all parts to include aluminum flage to weld on charge pipe. Add 3% paypal fee $165.00?? thank you!!
** BRAND NEW GRP aluminum rods for sale for 84.5mm bore. For LS/ B20 motor. 450.00 please add 3% paypal fee's. (Pending)
** Thermal R&D 3'' exhaust for Integra 3 door F/S exhaust was cut at the circle indicated to add the additional 3'' pipe to reach the down pipe. This is great for a full 3'' turbo exhaust, no need for test pipe.
** F/S TiAl used 50mm BOV comes with all parts to include aluminum flage to weld on charge pipe. Add 3% paypal fee $165.00?? thank you!!
Last edited by FRernesto; Dec 7, 2008 at 07:56 AM.
Long Block Engine $ 3000.00
aebs o ringed block
Type R crank balanced and polished
Pauter rods
CP pistons 84mm 9:7
ARP head studs
Head
Gsr head,
Ferrera valves 1mm
Ferrera titanuim springs and retainers
type R cams
BDL cam gears
JG intake manifold
70mm BDL throttle body
Competition Twin disk $ 700.00
fuel
1:1 Fuel presure regulator 100.00
EMS
Hondata S300/ECU $600.00
Innovative boost controller 5 stage $250.00
Chasis/$ 4000.00 will not part front end or optional kit,BUY car and you can do as please!
94 Acura Integra Jdm front, CW front bumper, carbon fiber hood, OEM
Suspension Omini drag coilovers
camber skunk 2
10 point roll cage
http://i64.photobucket.com/albums/h1...C_3629edit.jpg
http://i64.photobucket.com/albums/h1...racecar016.jpg
http://i64.photobucket.com/albums/h1...racecar006.jpg
http://i64.photobucket.com/albums/h1...racecar003.jpg
aebs o ringed block
Type R crank balanced and polished
Pauter rods
CP pistons 84mm 9:7
ARP head studs
Head
Gsr head,
Ferrera valves 1mm
Ferrera titanuim springs and retainers
type R cams
BDL cam gears
JG intake manifold
70mm BDL throttle body
Competition Twin disk $ 700.00
fuel
1:1 Fuel presure regulator 100.00
EMS
Hondata S300/ECU $600.00
Innovative boost controller 5 stage $250.00
Chasis/$ 4000.00 will not part front end or optional kit,BUY car and you can do as please!
94 Acura Integra Jdm front, CW front bumper, carbon fiber hood, OEM
Suspension Omini drag coilovers
camber skunk 2
10 point roll cage
http://i64.photobucket.com/albums/h1...C_3629edit.jpg
http://i64.photobucket.com/albums/h1...racecar016.jpg
http://i64.photobucket.com/albums/h1...racecar006.jpg
http://i64.photobucket.com/albums/h1...racecar003.jpg
Honda-Tech Member
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Steve Nguyen is the WINNER ! Proud owner of a new dynojet 248...
This is a "hotrod" style car we have sitting around that we did not finish because of a deal with GM. We have a **** load of extra parts here that we used to fab up the car and start to wrap up the build but never finished. The cage is built and designed but needs about 30% more welds to complete. We have a crap load of pictures that we can post or email but did not want to take up alot of space........
The car is what is it is and we know we will not get much for the chassis and parts but the car has the Xtrac trans we paid 18,500 plus the bell housing was 2,800. Please is you email send a budget you have, or an offer on the transmission / parts or chassis whatever you are interested in. This will help speed up the process and make for a quick sale. We will post and box and ship same day
Quick list of parts with car - WE WILL NOT PART OUT UNTIL WE SALE TRANSMISSION
Xtrac trans
Tilton carbon..carbon
Penske front shocks
Mark Williams front knuckles / axles / diff and brakes
Nuformz, Strange rear suspension and brakes
Wilson manifold
etc etc
email is fastest
Please try both emails for now, lap top took a fall and is getting repaired and we do not want to miss any emails =
Jason@RageImports.com
OR TRY - Jasonw909@tmail.com
aim = worldfst15
This is a "hotrod" style car we have sitting around that we did not finish because of a deal with GM. We have a **** load of extra parts here that we used to fab up the car and start to wrap up the build but never finished. The cage is built and designed but needs about 30% more welds to complete. We have a crap load of pictures that we can post or email but did not want to take up alot of space........
The car is what is it is and we know we will not get much for the chassis and parts but the car has the Xtrac trans we paid 18,500 plus the bell housing was 2,800. Please is you email send a budget you have, or an offer on the transmission / parts or chassis whatever you are interested in. This will help speed up the process and make for a quick sale. We will post and box and ship same day
Quick list of parts with car - WE WILL NOT PART OUT UNTIL WE SALE TRANSMISSION
Xtrac trans
Tilton carbon..carbon
Penske front shocks
Mark Williams front knuckles / axles / diff and brakes
Nuformz, Strange rear suspension and brakes
Wilson manifold
etc etc
email is fastest
Please try both emails for now, lap top took a fall and is getting repaired and we do not want to miss any emails =
Jason@RageImports.com
OR TRY - Jasonw909@tmail.com
aim = worldfst15
Last edited by Whitfield Inc.; Dec 30, 2008 at 01:14 PM. Reason: sold part
Honda-Tech Member
Joined: Jun 2005
Posts: 298
Likes: 0
From: Chicago
****FOR SALE**** Bullseye Power/Borg Warner S366 & S372R covers
I got a BRAND NEW Bullseye Power/Borg Warner T4 S366 .83 AR turbo up for sale. Will come with extras such as, Drain Flange, V Band flange and clamp ( for Exh side) and the exhaust side has been thermal coated, compressor side has also been powder coated black. Pics available upon request.
Also have a brand new S372R compressor cover, in a polished finish. Pm me for pricing if interested in anything. Thanks
Also have a brand new S372R compressor cover, in a polished finish. Pm me for pricing if interested in anything. Thanks
Last edited by indiglo32; Dec 16, 2008 at 04:06 PM.
Honda-Tech Member
Joined: Nov 2002
Posts: 4,789
Likes: 1
From: ORIGINAL H22 GANGSTA
full built h22 turbo midori ek civic
$15k..................possible trade and part out
http://i37.photobucket.com/alb...0.jpg
http://www.thespeedlounge.com/...0.jpg
http://www.thespeedlounge.com/...9.jpg
http://i239.photobucket.com/al...e.png
http://img.photobucket.com/alb...9.jpg
http://www.meilinkvision.com/md07/h22civ.jpg
http://www.meilinkvision.com/md07/h22civmotor.jpg
http://i50.photobucket.com/alb...0.jpg
http://i119.photobucket.com/al...S.jpg
http://i37.photobucket.com/alb...0.jpg
http://www.thespeedlounge.com/...0.jpg
http://www.thespeedlounge.com/...9.jpg
http://i239.photobucket.com/al...e.png
http://img.photobucket.com/alb...9.jpg
http://www.meilinkvision.com/md07/h22civ.jpg
http://www.meilinkvision.com/md07/h22civmotor.jpg
http://i50.photobucket.com/alb...0.jpg
http://i119.photobucket.com/al...S.jpg
