My name is Scott Worn, I am in hopes that you can help me. I am a 24 yr. old machinist by trade. I've built everything from a stock S-10 rebuild to a 28ft rail car pushing 1,100hp with 741 cubic inches. I have a 90' civic hatch in which I did a motor swap with a new paint job. First I started by building a built Mini-me then sold it right off the engine stand before it ever saw the car. I ended up putting a B16a with a a set of OBX 40mm throttle bodies, 440cc RC injectors, a walbro fuel pump, full redone suspension, tenzo-r race seats and full stripped down interior with a 8-point roll cage in its place. Here is the problem I am having with my current project....I have a brand new e-manage ultimate computer system to handle all the tuning but no one to wire in the system or even tune it. I've been working on this project almost 18 months and only had the chance to it drive once with the stock intake on it but the wiring wasn't finished because the v-tec wasn't hooked up. I've done all the myself so far, but I joined the Army almost a year ago and have not had the time to get what I needed done. Also I have been stationed in Newport News, VA from Fayetteville, NC for almost 6 months. I am now looking for a shop I can really trust to get the job done right. I've heard nothing but bad things about the e-manage and trying to get it wired.

 

Welcome to the site, I'd love to see the rail if you could post pictures.

I'm a little confused, do you want to keep the e-manage?

Are you looking for a shop/person in your area to install or a how to?

 

The biggest problem I have is the car is still OBD0 all the wiring including the ECU. I want to use the E-manage system but is it possible to keep the car wired OBD0 and wire in the e-manage to the OBD0 ecu using a universal harness I have with the e-manage and tune it. Don't know how to insert images but I do have a bunch of pics from my build over the last 18 months.

 

best bet would be to convert to obd1, you can check out the forced induction forum for local tuners I think there is a list stickied at the top