****FS: DarkSide's T-4 GOLD CRX Part Out!!! Shell, Custom Turbo Kit, Misc Parts!!!****
all good things must come to an end... my member emerson is parting out his 4+ year project racecar. he just recently got accepted into UCSB nursing program and he must partout his first love to pursue his career and for financial issues. the shell and all the parts are all in mint condition and have always been garaged. never seen the street and its only been at the track 5 times... and on the dyno 3 times.
1. 91 CRX shell
It is clean title and registered as non-op. Shell is painted custom Gold inside and out. Full 8 point roll cage, Wings West RS Kit modified to work with JDM headlights. Clean set of JDM headlights. VIS JDM style carbon fiber hood. Custom clutch pedal that will allow you to use Hydraulic transmission. Battery relocation terminals, custom aluminum battery box, custom mounted kill switch. 96 ITR 4x114 brakes (NO WHEELS INCLUDED). There is no AC, Heater core, or PS, etc.
-The Bad: Both fenders may need replacing, complete electrical needs changing (I will include a complete interior and engine bay harness
$2300 obo
how the car sits right now-





how it looked when running-



2. Custom Turbo Kit
I am selling my custom turbo kit, all parts were purchased brand new with receipt. The kit is used on my race car so there are only a few miles on the parts (not more then 30). I dont want to sell it but I need to money for school. With the right motor this can make alot of power. I made 400+HP @ 13PSI and 640+HP @ 19PSI on c16 race fuel. DNR PERFORMANCE in Hayward Tuned my car they can vouch what the kit is capable of.
Here are the parts list (WILL NOT PART OUT):
Neukin Ram Horm Manifold (Life Time warranty)
3" down pipe
Precision SC61
Full-Race Backdoor intercooler Rated 650hp
Tial 50mm BOV (red)
Tial 46mm Wastegate (red)
Intercooler Pipping 2 1/4(made to fit 94-01 integra)
Hose and t bolt clamps
Turbo XS dual manual boost controller
Autometer Boost Gauge
Precision 880cc injectors
Return and Feed AN line
Oil Pan
Bosch External Fuel Pump
Aeromotive Fuel Filter
All AN fittings and steel braided lines
$3500 obo
pix of it in his crx set up-

pix of the set up in his integra (partially in)-

3. Kirkey Race Seat & RJS Race Harness- SOLD!!!!
I have a fairly new Kirkey Aluminum seats with cover for sale asking - $110
RJS 5 point seatbelt harness -$45


4. Misc. Parts
96 Integra Radiator w/ Fan - $60
00 Integra LS tranny 5 speed with reciept - $300
94-01 Integra GSR Complete Engine mounts - $80
Autometer Tach - $30
Autometer Water Temp - $30
Modified by DSRxPRESIDENT at 7:26 PM 11/3/2008
Modified by DSRxPRESIDENT at 10:38 PM 11/5/2008
1. 91 CRX shell
It is clean title and registered as non-op. Shell is painted custom Gold inside and out. Full 8 point roll cage, Wings West RS Kit modified to work with JDM headlights. Clean set of JDM headlights. VIS JDM style carbon fiber hood. Custom clutch pedal that will allow you to use Hydraulic transmission. Battery relocation terminals, custom aluminum battery box, custom mounted kill switch. 96 ITR 4x114 brakes (NO WHEELS INCLUDED). There is no AC, Heater core, or PS, etc.
-The Bad: Both fenders may need replacing, complete electrical needs changing (I will include a complete interior and engine bay harness
$2300 obo
how the car sits right now-





how it looked when running-



2. Custom Turbo Kit
I am selling my custom turbo kit, all parts were purchased brand new with receipt. The kit is used on my race car so there are only a few miles on the parts (not more then 30). I dont want to sell it but I need to money for school. With the right motor this can make alot of power. I made 400+HP @ 13PSI and 640+HP @ 19PSI on c16 race fuel. DNR PERFORMANCE in Hayward Tuned my car they can vouch what the kit is capable of.
Here are the parts list (WILL NOT PART OUT):
Neukin Ram Horm Manifold (Life Time warranty)
3" down pipe
Precision SC61
Full-Race Backdoor intercooler Rated 650hp
Tial 50mm BOV (red)
Tial 46mm Wastegate (red)
Intercooler Pipping 2 1/4(made to fit 94-01 integra)
Hose and t bolt clamps
Turbo XS dual manual boost controller
Autometer Boost Gauge
Precision 880cc injectors
Return and Feed AN line
Oil Pan
Bosch External Fuel Pump
Aeromotive Fuel Filter
All AN fittings and steel braided lines
$3500 obo
pix of it in his crx set up-

pix of the set up in his integra (partially in)-

3. Kirkey Race Seat & RJS Race Harness- SOLD!!!!
I have a fairly new Kirkey Aluminum seats with cover for sale asking - $110
RJS 5 point seatbelt harness -$45


4. Misc. Parts
96 Integra Radiator w/ Fan - $60
00 Integra LS tranny 5 speed with reciept - $300
94-01 Integra GSR Complete Engine mounts - $80
Autometer Tach - $30
Autometer Water Temp - $30
Modified by DSRxPRESIDENT at 7:26 PM 11/3/2008
Modified by DSRxPRESIDENT at 10:38 PM 11/5/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ErrDizzle »</TD></TR><TR><TD CLASS="quote">haha i noticed that too. you parting out the victor x?</TD></TR></TABLE>
oh btw.. VICTOR X MANI IS FOR B16 HEAD
oh btw.. VICTOR X MANI IS FOR B16 HEAD
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NorCal EM1 »</TD></TR><TR><TD CLASS="quote"> 4000+ HP @ 13 PSI 
I want this kit now!
</TD></TR></TABLE>
woops fixed

I want this kit now!
</TD></TR></TABLE>woops fixed
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DSRxPRESIDENT »</TD></TR><TR><TD CLASS="quote">
oh btw.. VICTOR X MANI IS FOR B16 HEAD
</TD></TR></TABLE>
its not listed tho
oh btw.. VICTOR X MANI IS FOR B16 HEAD
</TD></TR></TABLE>its not listed tho
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YeeJ6 »</TD></TR><TR><TD CLASS="quote">guess the car didnt perform the way you guys wanted it too?</TD></TR></TABLE>
the car and motor did good... just needed to dial it in... hes only selling cause hes moving to so cal for school... and he doesnt want a shitload of loans... after he grads in 2 years hell build something bigger and better
the car and motor did good... just needed to dial it in... hes only selling cause hes moving to so cal for school... and he doesnt want a shitload of loans... after he grads in 2 years hell build something bigger and better
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc2crx »</TD></TR><TR><TD CLASS="quote">sucks, but for a good cause
</TD></TR></TABLE>
x2
</TD></TR></TABLE>x2
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DSRxEMS »</TD></TR><TR><TD CLASS="quote">ttt </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DSRxEMS »</TD></TR><TR><TD CLASS="quote">
joe.</TD></TR></TABLE>
when are you moving?
joe.</TD></TR></TABLE>when are you moving?



