FS: JDM ITR MOTOR, EG,DC,RSX,PARTS, COILOVERS, JDM PARTS ECT. BIG PARTS LIST LOOK!!!!!!!
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2005
Posts: 830
Likes: 0
From: FLOSSANGELES, ca, 90008
[B]i have a JDM ITR comeplete change over (98 spec.) ready to drop in acura, civic ect. the only this is that i have a b16 trans (shorter gears) with no lsd, better in my opinion. I can add a lsd for a little more... long story got jacked for my itr trans, everything in good condition trans has been opened & checked just to make sure good condition no grinds ect. had this motor sold & on hold to a good friend that told me to hold it for him, i did 4 a while and he flaked on me hard core!! thats another story tho could have had it sold long ago..... right now ill just say make a good offer i can't resist , don't want to separate want to sell complete.... don't come with no low balling and tripping ect. if your not serious don't come at me at all!!! got rid of my honda so don't really need anything, i got people to vouch for me on here specs. and pics below........[B]
ok since most people are not reading the post and or comming at me sideways
with outrageous lowball ish!!! in ect.
PRICE: ill start at & go from there 3,700 obo (BEST OFFER) (it's cool 2 make offers just be realistic!!!!)
whats there:
b18c R 98 spec. 200hp
complete wire harness
ecu
axles (36mm)
half shaft
shift linkage
has aftermarket clutch set up
b16 trans (for short gears)
exhaust manifold[B/]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
NEXT i have a for sale ITR steering wheel, axle back muffler, replica itr strut bar(new), and floor mats
MAKE OFFER THAT'S COOL......... LOW BALLING WILL BE IGNORED!!!!!!!!!!!!!!
Prices:
itr steering wheel good condition (this one not that common) 260 obo
itr axle back muffler good condition(lil dent on tip not bad at all) 140 obo
also have the b-pipe kat and o2 sensor (not itr but moded to bolt right up like factory) if you want both ill make you a deal inquire within...
itr replica strut tower bar (new) fits civic and integra looks nice! 30
itr floor mats good condition they look dusty in the pic.... better in preson 80 obo
itr clock (only one is a itr clock the other is from a gsr) 50 obo
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
i have a black JDM eg center console for sale comes with bracket might have broken tab not sure and a pocket may be another one if i can find it .... I also have some what ever coilover set up for eg or dc in what ever condition don't expect a lot they just cool not to bad, just if you want your car lowered or slammed and don't have money to get the good stuff at least you will have that fresh look!!! wasn't a bad ride when i had them on long ago
eg console SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
coilovers w/shocks SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
i also have a set of hotchkis sway bars (front and rear) for RSX (the beefy ones) comes with one set of end links had both sets can't locate the others ones might have got thrown away......price 260 specs and pic below
specs: Hotchkis Tuning Competition Sway bars take performance to the next level. Competition bars offer the same great benefits as our sport sway bars, but use a more aggressive rear bar set to take advantage of race tires, and to achieve slight over steer. Sway bar sets include front and rear bars, end links, greasable bushings, and brackets.
Front 1" (25.4mm) Hollow +59% & +71%
Rear 1 1/16" (27mm)Hollow +202% & 220%
2 Position Adjustable Front and Rear
retail 550 without end links 85 per set for links
[IMG]
[/IMG]
[IMG]
[/IMG]
Modified by c4agmaddness at 12:32 AM 11/4/2008
ok since most people are not reading the post and or comming at me sideways
with outrageous lowball ish!!! in ect.
PRICE: ill start at & go from there 3,700 obo (BEST OFFER) (it's cool 2 make offers just be realistic!!!!)
whats there:
b18c R 98 spec. 200hp
complete wire harness
ecu
axles (36mm)
half shaft
shift linkage
has aftermarket clutch set up
b16 trans (for short gears)
exhaust manifold[B/]
[IMG]

[/IMG]
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] NEXT i have a for sale ITR steering wheel, axle back muffler, replica itr strut bar(new), and floor mats
MAKE OFFER THAT'S COOL......... LOW BALLING WILL BE IGNORED!!!!!!!!!!!!!!
Prices:
itr steering wheel good condition (this one not that common) 260 obo
itr axle back muffler good condition(lil dent on tip not bad at all) 140 obo
also have the b-pipe kat and o2 sensor (not itr but moded to bolt right up like factory) if you want both ill make you a deal inquire within...
itr replica strut tower bar (new) fits civic and integra looks nice! 30
itr floor mats good condition they look dusty in the pic.... better in preson 80 obo
itr clock (only one is a itr clock the other is from a gsr) 50 obo
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] i have a black JDM eg center console for sale comes with bracket might have broken tab not sure and a pocket may be another one if i can find it .... I also have some what ever coilover set up for eg or dc in what ever condition don't expect a lot they just cool not to bad, just if you want your car lowered or slammed and don't have money to get the good stuff at least you will have that fresh look!!! wasn't a bad ride when i had them on long ago
eg console SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
coilovers w/shocks SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] i also have a set of hotchkis sway bars (front and rear) for RSX (the beefy ones) comes with one set of end links had both sets can't locate the others ones might have got thrown away......price 260 specs and pic below
specs: Hotchkis Tuning Competition Sway bars take performance to the next level. Competition bars offer the same great benefits as our sport sway bars, but use a more aggressive rear bar set to take advantage of race tires, and to achieve slight over steer. Sway bar sets include front and rear bars, end links, greasable bushings, and brackets.
Front 1" (25.4mm) Hollow +59% & +71%
Rear 1 1/16" (27mm)Hollow +202% & 220%
2 Position Adjustable Front and Rear
retail 550 without end links 85 per set for links
[IMG]
[/IMG] [IMG]
[/IMG] Modified by c4agmaddness at 12:32 AM 11/4/2008
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kelb
Classifieds: Forced Induction
7
May 3, 2012 01:37 PM
nfakbc
Northwest (Sales)
3
Aug 17, 2010 08:52 PM
c4agmaddness
Southern California (Sales)
16
Oct 24, 2008 12:36 PM
b18c eJ1
Southern California (Sales)
7
Jan 12, 2008 10:51 AM




