Im tryin to see if anyone wants to work something out to trade my Darton Dry Sleeve block for a good Edelbrock victor X manifold. or sell for $350

Ill also be pulling a Skunk2 Pro intake manifold off my car so that will be up for grabs as well.

I got my Benson block which is good to 60psi, so im selling my Darton block which is only good to 30psi. The block does need to be bored to 81.5 mm as the last person who had it ran the piston to wall clearances to tight at 81mm and caused some scarring. I picked this block up from Brandon (gsrhb7) so i know its legit.

These are dry sleeves as opposed to wet sleeves in the benson and the difference can be found here
http://www.darton-international.com/tech_ctr.htm

Here is a pic of a stock honda b18


And here is the pic of the dry darton sleeves


Heres the block itself


You can see the sleeve is almost twice as thick. Its what Darton calls the 300 series sleeves which can be seen here
http://www.dartonsleeves.com/sb_assy.htm
There are several people who have gotten over 600hp out of this same block.

And here is the wet sleeve


What it will be goin on just to ***** outmy car a little more.

 

looking for trades?

 

well mostly for an intake manifold. whatcha got?

 

bump

 

wannatrade your blokck for my enkeis ther for sale in the classifieds heres my number if interested 2532736672

 

do you need a manifold for a GSR head or B16/ITR head?

 

either

 

bump...