rebuilding a D15 head
Thread Starter
Joined: Sep 2008
Posts: 5
Likes: 0
From: Tuscaloosa, AL, USA
rebuilding a D15 head
Ok I've decided to rebuild the head on my D15 since it blew the gasket. I am going to get a good head that I know is unwarped and uncracked. Of course a machine shop will do the rebuild, but are there any specific parts I should get that would be better than the stock components? I know D15 performance parts are hard to find. Also, will it be a hard job if I take the head off and put it back on myself? The shops around here are wanting around 800 to do it and that's pretty hefty!
Honda-Tech Member
Joined: Nov 2006
Posts: 2,005
Likes: 3
From: California
Re: rebuilding a D15 head (zwkuykendall)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zwkuykendall »</TD></TR><TR><TD CLASS="quote">Ok I've decided to rebuild the head on my D15 since it blew the gasket. I am going to get a good head that I know is unwarped and uncracked. Of course a machine shop will do the rebuild, but are there any specific parts I should get that would be better than the stock components? I know D15 performance parts are hard to find. Also, will it be a hard job if I take the head off and put it back on myself? The shops around here are wanting around 800 to do it and that's pretty hefty!</TD></TR></TABLE>
for that price swap in a B series.....
for that price swap in a B series.....
Re: rebuilding a D15 head (TOO MUCH TORQUE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TOO MUCH TORQUE »</TD></TR><TR><TD CLASS="quote">
for that price swap in a B series.....</TD></TR></TABLE>Or at least a dohc zc.
for that price swap in a B series.....</TD></TR></TABLE>Or at least a dohc zc.
Thread
Thread Starter
Forum
Replies
Last Post
OH_1fstgsr
All Motor / Naturally Aspirated
5
Mar 6, 2007 04:23 AM
