My brother drove this car and got clipped in the front right corner. The frame wasn't bent, but the front most sheet metal under the fender was bent. I have that straightened out though.
The good: It runs and drives fine. My brother drove it from the Quad City area (western Illinois) to Omaha Nebraska multiple times before I started working on it. I have a new radiator support panel ready to weld on, a hood, 2 fenders, all the trim and everything to complete the car, along with new front brake discs, pads and a new water pump, timing belt, hoses. The car has a pretty new exhaust, new front tires, new looking CV shafts, a new oil pan gasket, and everything is bone stock except the Pioneer radio and Rockford Fosgate speakers.

The bad: It's green with a red driver's side door off a DX (I still have the EX door, haven't swapped parts over yet), the paint is scuffed up bad from doing bodywork and sanding and I was told it has some kind of issue with the tail lights staying on. The passenger side door handle is sticky, but that could probably be fixed with a little WD40.

For someone with a little time to do bodywork, this could be a nice daily driver.

I don't expect much interest, but if anyone is looking for something like this, I would like to trade for a 5th generation hatchback project, or throw some money in for something. I've lost interest in the coupe, and I don't have a lot of time to work on something I'm ultimately selling anyway.

 

can i get some pics . email- dragelements@yahoo.com thanks Paul

 

I'll take some pictures later. Its not in bad condition, only two small rust spots that I've already cut out. The car was garaged most of it's life.

 

pm me when you get pics i wont come back here thanks