FS Local: Huge B18C Part Out!! L@@k!! 1k miles on most stuff!
Hey guys, parting out a B18C... and questions about anything, just pm me or email me thanks!
<U>JDM Type-R Valve Cover w/ oil cap SOLD!!</U>
<U>Skunk2 Intake Manifold B18C/C1/C5</U>
SOLD!!!
<U>Hondata gasket SOLD!</U>
<U>DC Sports ITR Style Header SOLD!</U>
roughly 1k on it LN, no dents or dings
<U>AEM Short-ram intake SOLD!!</U>
ARP HeadStuds for B18C/C1/C5 GSR SOLD!!
pn: 208-4303...1k on them
Skunk2 dual ValveSprings/ titan. Retainers 150.00 ea
springs- 311-05-0350 retainers- 308-05-0300


Exedy Stage 1 clutch SOLD!!
Skunk2 Shift **** SOLD!
Boomslang Conversion Harness 75.00 USD ps
obd2-obd1 conv.


Hondata s200 240.00 USD
complete with everything for install


B18C Throttle Body Bored 50.00 USD
JDM GSR TB throttle body with sensors intact & working


Obd2 Wireharness 275.00 USD
<U>SOLD!!!</U>
Obd2 Distributor SOLD!!
roughly 1k on it LN
OBD2 Injectors 35.00 USD


OBD2 Altenator 50.00 USD
[img=http://img214.imageshack.us/img214/8800/img0070iu6.th.jpg][img=http://img214.imageshack.us/images/thpix.gif]
B-Series Flywheel 40.00 USD


B-series Fuel rail SOLD!
Gsr IACV 35.00 USD


B-series half shaft... SOLD!
B-series Axles SOLD!!
o2 Sensor 35.00 USD


Spark Plug Wires 35.00 USD


<U>B18C block make offer</U>
block is obd1 b18c, had a piston blow up, just left some scratches in wall, which will need to be honed, not sure of what else is scratched yet, didnt take it apart... all other three are jdm itr pistons.


also have a JDM Gsr Head available
full port and polish w/ valve job comes with JDM GSR valvetrain. head has a few scratches in cylinder 1 which can be taken to machine shop to easily clean up...
before install to show p&p






ONLY HAS 1k since the Port and Polish.
Comes with full JDM GSR valvetrain; (Cams, Valvesprings, Retainers, valves, valve keepers, everthing else pictured....) local shop installed valvetrain back in.








any questions pm or email me...
my email is imacul8accord02@yahoo.com
Thanks
Jess
Modified by hndacord02 at 3:17 AM 10/14/2008
<U>JDM Type-R Valve Cover w/ oil cap SOLD!!</U>
<U>Skunk2 Intake Manifold B18C/C1/C5</U>
SOLD!!!
<U>Hondata gasket SOLD!</U>
<U>DC Sports ITR Style Header SOLD!</U>
roughly 1k on it LN, no dents or dings
<U>AEM Short-ram intake SOLD!!</U>
ARP HeadStuds for B18C/C1/C5 GSR SOLD!!
pn: 208-4303...1k on them
Skunk2 dual ValveSprings/ titan. Retainers 150.00 ea
springs- 311-05-0350 retainers- 308-05-0300


Exedy Stage 1 clutch SOLD!!
Skunk2 Shift **** SOLD!
Boomslang Conversion Harness 75.00 USD ps
obd2-obd1 conv.


Hondata s200 240.00 USD
complete with everything for install


B18C Throttle Body Bored 50.00 USD
JDM GSR TB throttle body with sensors intact & working


Obd2 Wireharness 275.00 USD
<U>SOLD!!!</U>
Obd2 Distributor SOLD!!
roughly 1k on it LN
OBD2 Injectors 35.00 USD


OBD2 Altenator 50.00 USD
[img=http://img214.imageshack.us/img214/8800/img0070iu6.th.jpg][img=http://img214.imageshack.us/images/thpix.gif]
B-Series Flywheel 40.00 USD


B-series Fuel rail SOLD!
Gsr IACV 35.00 USD


B-series half shaft... SOLD!
B-series Axles SOLD!!
o2 Sensor 35.00 USD


Spark Plug Wires 35.00 USD


<U>B18C block make offer</U>
block is obd1 b18c, had a piston blow up, just left some scratches in wall, which will need to be honed, not sure of what else is scratched yet, didnt take it apart... all other three are jdm itr pistons.


also have a JDM Gsr Head available
full port and polish w/ valve job comes with JDM GSR valvetrain. head has a few scratches in cylinder 1 which can be taken to machine shop to easily clean up...
before install to show p&p






ONLY HAS 1k since the Port and Polish.
Comes with full JDM GSR valvetrain; (Cams, Valvesprings, Retainers, valves, valve keepers, everthing else pictured....) local shop installed valvetrain back in.








any questions pm or email me...
my email is imacul8accord02@yahoo.com
Thanks
Jess
Modified by hndacord02 at 3:17 AM 10/14/2008
Thread
Thread Starter
Forum
Replies
Last Post
hndacord02
For Sale
43
Oct 13, 2008 12:37 PM
JeffS
For Sale
52
Nov 10, 2004 08:08 AM
scoobydoobie
Classifieds: Forced Induction
4
Feb 4, 2004 01:25 PM



