I have a 88 CRX with a B16a Vtec in it . i pulled my cable tranny to put in a new stage 1 racing clutch in i measured my pressure plate and throw out baring it's all the same. when i put it all back together. the clutch arm on the tranny went up with out putting pressure on the pressure plate. when I pull the arm out away from the tranny it seems to want to engage. I pulled it all out and put my original cluth and plate back on and the same thing is happening. The forks inside press up against the little lip on throw out baring. is there suppost to be play on the arm? I have no idea what i am doing wrong please help. it seems like the baring isn't going out far enough or something what am i doing wrong?