ok so ive looked and need some more help....
Thread Starter
Honda-Tech Member
Joined: Aug 2008
Posts: 214
Likes: 0
From: San Jose, CA, USA
ok so ive looked and need some more help....
Im in the running for possibly 3 motors i want but i cant decide which one to go with...
I have a 1993 Honda Civic HB with currently a b20b in it... im looking to upgrade....the three motor choices are:
1. K20A2
2. F20B (accord motor i think 200 hp)
3. B18C5
I know its the money but thats not a problem....im looking for best bang for my buck.....looking to be over the 200hp range obviously so any suggestions......??? and no i dont wanna hear from the peanut gallery....
I have a 1993 Honda Civic HB with currently a b20b in it... im looking to upgrade....the three motor choices are:
1. K20A2
2. F20B (accord motor i think 200 hp)
3. B18C5
I know its the money but thats not a problem....im looking for best bang for my buck.....looking to be over the 200hp range obviously so any suggestions......??? and no i dont wanna hear from the peanut gallery....
Honda-Tech Member
Joined: Jan 2002
Posts: 15,334
Likes: 1
From: Raleigh, NC
Re: ok so ive looked and need some more help.... (zacatkings)
Honda-Tech Member
Joined: Nov 2007
Posts: 1,354
Likes: 0
From: Pottstown, PA, United States
Re: ok so ive looked and need some more help.... (Ricey McRicerton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">I didn't write all this up for fun:
https://honda-tech.com/zerothread/878010</TD></TR></TABLE>
and in there is one swap that says, IMO THE BEST SWAP FOR A CIVIC. look for those words and think about the pro's and con's as written about for each engine.
https://honda-tech.com/zerothread/878010</TD></TR></TABLE>
and in there is one swap that says, IMO THE BEST SWAP FOR A CIVIC. look for those words and think about the pro's and con's as written about for each engine.
Honda-Tech Member
Joined: Dec 2005
Posts: 715
Likes: 0
From: kingston, ny, usa
Re: ok so ive looked and need some more help.... (davefromPA)
why not throw some higher compression pistons and some aftermarket rods in that b20 block and find a dohc b series vtec head?..
Trending Topics
Honda-Tech Member
Joined: Nov 2001
Posts: 1,087
Likes: 1
From: 30 min. north of Owen Sound, Ontario, Canada
Re: ok so ive looked and need some more help.... (PurpleB20B)
I would personally go with F20B/H2B setup... OR if under budget, I'd get a B16/B18C/1/5 head and slap it on.
That's just me tho.. Look and ask around more, get ideas and do what YOU want to do.
That's just me tho.. Look and ask around more, get ideas and do what YOU want to do.
Junior Member
Joined: Apr 2008
Posts: 200
Likes: 0
From: 256, AL, United States
Re: (00b20vtecoupe)
I have a b20bvtec with gsr head and I like it, nice torque and power but if you have the money go k. K series are the future man. A lot of people have b series and what not but k series are somewhat seen less often. Idk if it was me, and I had the money id go k or f20/h2b
Honda-Tech Member
Joined: Apr 2007
Posts: 3,156
Likes: 0
From: Being A Stallion in, Maine, USA
Re: (DTA-Zombie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DTA-Zombie »</TD></TR><TR><TD CLASS="quote">h22 or h2b IMO</TD></TR></TABLE>
ive been driving an H22a Ej1 all day
pwned a colbalt SS on I95
i have to give it back later tho
ive been driving an H22a Ej1 all day
pwned a colbalt SS on I95
i have to give it back later tho
Honda-Tech Member
Joined: Nov 2005
Posts: 3,643
Likes: 0
From: Somewhere puffin away in Spokane, USA
Re: ok so ive looked and need some more help.... (geebs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by geebs »</TD></TR><TR><TD CLASS="quote">why not throw some higher compression pistons and some aftermarket rods in that b20 block and find a dohc b series vtec head?..</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Aug 2008
Posts: 214
Likes: 0
From: San Jose, CA, USA
Re: (sde780)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sde780 »</TD></TR><TR><TD CLASS="quote">boost your b20 </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikej425 »</TD></TR><TR><TD CLASS="quote">I have a b20bvtec with gsr head and I like it, nice torque and power but if you have the money go k. K series are the future man. A lot of people have b series and what not but k series are somewhat seen less often. Idk if it was me, and I had the money id go k or f20/h2b</TD></TR></TABLE>
I am just gonna go with the K20A2 swap, im going to sell the B20 swap for some extra funding which will be like shift linkage and mounts etc, i will let you all know how everything goes and give a full write up on my experiences and hopes but yeah im ordering my motor on friday and hopegully get it in 2-4 weeks.....btw going with the USDM K20A2 not the K20 type r cause why pay over $4k++++ when its not even proven to be a better motor......ill put the extra into the motor!!!! LOL hehe anyway we will see if there is a "k-killer" motor when im done that can show around the bay....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikej425 »</TD></TR><TR><TD CLASS="quote">I have a b20bvtec with gsr head and I like it, nice torque and power but if you have the money go k. K series are the future man. A lot of people have b series and what not but k series are somewhat seen less often. Idk if it was me, and I had the money id go k or f20/h2b</TD></TR></TABLE>
I am just gonna go with the K20A2 swap, im going to sell the B20 swap for some extra funding which will be like shift linkage and mounts etc, i will let you all know how everything goes and give a full write up on my experiences and hopes but yeah im ordering my motor on friday and hopegully get it in 2-4 weeks.....btw going with the USDM K20A2 not the K20 type r cause why pay over $4k++++ when its not even proven to be a better motor......ill put the extra into the motor!!!! LOL hehe anyway we will see if there is a "k-killer" motor when im done that can show around the bay....
Joined: Sep 2008
Posts: 25
Likes: 0
From: Federicksted, USVI, St Croix
Re: ok so ive looked and need some more help.... (zacatkings)
It might just be me but i think you already have a good foundation for power, instead of trying to buy a new motor, why not spend the cash on some upgrades there's so much that can be done to that b20, cams,springs,headporting,more compression and BOOST (just to name a few). 
Thread
Thread Starter
Forum
Replies
Last Post
SlagleBigdogg89
All Motor / Naturally Aspirated
4
Sep 18, 2007 08:41 PM
