So i need a little advice, i currently have a regular cast iron manifold on my turbo gsr with 10lbs of boost. But my neighbor said that he would trade me his "rev hard" stainless steel ramhorn manifold for mines plus 100 bucks. I dont know for sure if it is a rev hard manifold because it doesnt say anything on it but it looks pretty nice. But some of my friends are telling me dont do it because it will crack. Is this true and should i just stick with my cast iron manifold or should i do the trade?? Any advice is appreciated

 

Do you have any pics of the manifold?

 

since when did revhard make ramhorns? ive only see them make cast, mini ram, and top mounts... pics of said manifold please...

 

thats what even made me more skeptical because i know that revhard doesnt make ramhorn manifolds. but my neighbor is on vacation right now so i dont have any pics right now. but now that i am looking around the manifold kind of looks like the ssautochrome manifold but im not completly sure

 

Is it this manifold?



There's also the chance that it was a custom manifold made by RevHard.

I'd say send some pictures of it to someone at RevHard and see what they can tell you.

EDIT: The main picture on the RevHard site shows more of a ramhorn manifold as well:


So there is a possibility that it is in fact a RevHard manifold. Again, I'd check with RevHard though just to be sure.


Modified by .dave at 3:41 PM 9/15/2008

 

post pics of it, i will tell you if its a revhard or not, i used to work with a lot of there crap, err i mean parts...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 &raquo;</TD></TR><TR><TD CLASS="quote">post pics of it, i will tell you if its a revhard or not, i used to work with a lot of there crap, err i mean parts...</TD></TR></TABLE>

I dunno.. worked with that first manifold .dave has for 6 years, and recoated twice. Not one issue.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheShodan &raquo;</TD></TR><TR><TD CLASS="quote">

I dunno.. worked with that first manifold .dave has for 6 years, and recoated twice. Not one issue.</TD></TR></TABLE>

If thats the manifold I'm thinking it is then its there non-ac cast manifold thats been ported? And that is the only manifold they sell that is fantastic, it flows great and can support A LOT of power if ported and will never crack, unfrotunately they no longer work with the casting company who did that particular unit and that company only made that one. the rest where made elsewhere for much less and thats why they suck.