anyone know of any company of machine shop that makes adapter plates for the s2000 motor and the th400 tranny?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhatS2000Turbo &raquo;</TD></TR><TR><TD CLASS="quote">anyone know of any company of machine shop that makes adapter plates for the s2000 motor and the th400 tranny?</TD></TR></TABLE>

Highly doubt that its been done already. Will need to be custom most likely

 

http://www.billsautofab.com/ he makes good adapter plates. I jsut ordered mine for my 4g63 to a power glide I would love to see a plate for a rwd honda

 

i know james from jg fab had one made for his s2000 when he installed the th400 tranny. im not sure what ever happen to it tho.

 

I would be interested in this as well. im tired of the garbage 6 speed, im on my 3rd and there not so cheep.

 

we have a k-series to GM adapter plate here at Mazworx, but i'm assuming the bolt pattern is different. we can make the plate you're looking for no problem though. all we would need is a bell housing or a junk block that we can probe.

 

its actually at my shop and also the solid mounts. if your interested let me know and ill talk to him.

 

jg-fab one sorry

 

Damn thats cool. Would have never thought someone has done this. Thats cool to see.

 

just the plate or does he have the flywheel to bolt the stall converter too?

 

Mark williams has them
800-525-1963

 

http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123

 

Have you taken a look at the amount of tunnel that needs to be removed/relocated? The t400 is a wide transmission and also heavy. Allot of the super stock guys run a t350 depending on the power you make. The other thing you need to consider is DO NOT mess around with some budget rebuild. These will come apart/explode at high rpm. SEEN it and it was ugly at best. Unfortunately the only trans that does fit rather well doesn't seem to like the RPM either and that is the C4 ford trans. Can be made more then strong enough but have some sort of the seal issue that afffect a clutch pack above 8000 from what I have been told from someone that builds some pretty bullet proof ones. That was about a year or so ago so maybe things have changed. I know they have been running them on the modular motors and they spin them.

 

what about a t56 i know a few guys that are using them on rwd 4g63's.

 

Why not look into a G-Force T-56, pretty much a T-56 dogbox with all g-force internals. Maybe even a powerglide like the supra guys.

 

We are currently finishing this setup for David at Secret Serives here in Houston

Will have a complete swap kit pretty soon

 

We are in the middle of all the development for the plate then we will be testing it on our S2000, once everything goes well we will have a in stock off the shelf complete kit availible to the public, we will offer it with all mounts, adapter plate, and torque converter/flyplate and as a complete kit with the addition of a built transmission and shifter. Im not a sponser on here so not really going to go into any other details, if any one has any questions please feel free to pm me.

 

We can kick a few out call the shop if your interested 970-377-2216 we did brents for his f20c to glide.

 

in for this.

I LOVE the th400 and have built a few... I don't think a stock F20 could spin one

If someone pulled this off the work would be out of control

 

If this is the S2K Im thinking of its definetley NOT lackin the HP and TQ department

I think I saw it on supraforums


I too am as we speak putting my built chevy trans in my SC300, lots of hammering, shaving, and good use of a port-a-power spreader fits like factory now tho

 

dont let it die, im interested if a kit comes out

 

Whats the take on the BMW M3 gearbox's mated to a f20c. they quite compact and strong

 

im interested too, has anyone come out with a adapter plate yet?

 

Any updates on this adapter plate?

I am in need of one for a K20 to Chevy for a Sand Dragster we're building.

Thanks,

Kyle Werks
West-Werks

 

how bout k series to f20 trans? i would definitely be interested in that plate.