Please don't forget i have this part...tell your friends with ep3's
EP3 02-05 civic Si Neuspeed black front strut tower bar. $40 Pics coming soon.

Also...I might have 94-01 integra dual gauge pod (obx) up for sale soon (brand new). Maybe even some Brand new Pivot shift lights (made in japan )
Temporary link until i put up actual pictures of the ones (2 different kinds) i have for sale

http://www.pivotusa.com/shiftlamps/pivssl_m.htm
http://www.pivotusa.com/shiftlamps/pivssl_p.htm

92-95 and 94-01 stock rear lower control arms. Anyone need this?

GSR distributor that works perfectly (OBD I). The only thing is it comes just how you would get it from the dealer. Missing cap, rotor, coil, etc. Exactly how it comes when you order from the dealer. Works perfect guaranteed. i swapped parts needed to complete my brand new distributor. check part number that is shown in the picture. MAKE OFFERS





SOLD to EGWhore Stock GSR camshafts with approximately 80k miles. They are in really good condition. SOLD to EGWhore



SOLD to b18vtecboi First up is an OBX B16 transmission LSD. Used on my girlfriend's 00 Si for approximately 25k miles. She got tranny work done and bought an new wavetrac LSD so she does not need this anymore. SOLD to b18vtecboi

SOLD to lilxdrifterx06 Blox v stack w/ blox air filter. Put it on once but did not drive with it. I have comptech intake and icebox but it didn't work out as nice as i hoped so it is up for sale. Bought from JHPusa for $52 plus tax. I ain't going to get my money back but i ain't giving away either. SOLD to lilxdrifterx06

SOLD to bzyq2001 Buddy Club spec IV cams. i bought it brand new from oldskoolteggy on here and i put 6k miles on it before i spun a rod bearing on my motor. There are minor wear on exhaust side lobes as shown. Exhaust cam is the front cam in the pictures. i tried my best to show lobe wear. I think it is the result of improper springs (ITR outter Portflow inners) possibly coil bind. Still in really great working condition and was only used for 6k miles. Motor felt great with these cams and if i hadn't spun rod bearing i would still be running these (207hp on dynapack) SOLD to bzyq2001


SOLD to bsyq2001 Buddy Club Ti Retainers, i bought them brand new from david at import auto pros. They are used for only 6k miles before i spun a rod bearing in my motor and have to rebuild it. There are some minor wear but the thickness of the retainers are still very good. No abnormal wear of the thickness and look pretty good except for black nitride coating scraped off from valve springs. SOLD to bsyq2001


SOLD to ()()DC2 My girlfriend has 16" Bronze Wedsport SA 90 rims with 205/45/16 kuhmo asx with good tread and no negative camber wear. There is one rim with curb marks and the others are in excellent condition. I'll try and get pictures by the weekend, her car is garaged at her parents home. SOLD to ()()DC2




Any questions please ask...thanks!

-Ray


Modified by SiRay6 at 3:57 PM 9/16/2008


Modified by SiRay6 at 4:18 PM 9/19/2008

 

In the first pic it looks like there's a bolt missing in the LSD, but it also kinda looks intentional.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by scratchymaster &raquo;</TD></TR><TR><TD CLASS="quote">In the first pic it looks like there's a bolt missing in the LSD, but it also kinda looks intentional. </TD></TR></TABLE>

Interesting! Good eyes. I just took it out of box to snap some pictures. I'm pretty sure it is okay like that though...does anyone else know? That hole does look a little smaller than the rest? We got the LSD installed at specialprojectsms, i trust they did a good job.

-Ray

 

Bump for myself

 

bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg2jr &raquo;</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>

Thanks for the bump!

-Ray

 

Buddy Club spec IV cams and Buddy club ti retainers are pending sale to bzyq2001.

-Ray

 

where are you located at?

 

Diamond Bar...where the 57fwy and 60 fwy meet



-Ray

 

Buddy Club spec IV cams and Buddy Club ti retainers are sold

Almost all the goods have been sold

 

Bump. Great seller, very honest

 

Thank you so much Thai! Great meeting you and let me know when the diff gets installed and how everything works out!

-Ray

 

PMED!

 

yup ill let you know how it goes. thanks

 

Pictures of Wedsports are up!

Couple of people are really interested in rims...remember first come first serve

I have a wedding banquet to go to right now so i won't be home until later on.

-Ray

 

To the top! Pm'd with trade offer, let me know boss!

 

bump for a great seller!!!!!!! I GOT THE VELOCITY STACK!!!!!!!

 

TTT

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18vtecboi &raquo;</TD></TR><TR><TD CLASS="quote">TTT </TD></TR></TABLE>

Thanks!

 

Wedsports are SOLD to ()()DC2 . I have to say ()()DC2 is a GREAT guy to do business with He drove down from Santa Barbara and did exactly what he said he would do in the pm's...came down the next day and paid $800 straight up with no bargaining or hassling! Just a real stand up guy and I'll vouch for this guy any day!

**Hmmm, we are in a recession??? I've sold almost everything! Thanks HT

bump for a few more items left!

-Ray

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRay6 &raquo;</TD></TR><TR><TD CLASS="quote">Wedsports are SOLD to ()()DC2 . I have to say ()()DC2 is a GREAT guy to do business with He drove down from Santa Barbara and did exactly what he said he would do in the pm's...came down the next day and paid $800 straight up with no bargaining or hassling! Just a real stand up guy and I'll vouch for this guy any day!

**Hmmm, we are in a recession??? I've sold almost everything! Thanks HT

bump for a few more items left!

-Ray</TD></TR></TABLE>
Thanks Ray, your a cool guy too. Nice person and he doesnt BS! NO BENDS & Tires were very good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ()()DC2 &raquo;</TD></TR><TR><TD CLASS="quote">
Thanks Ray, your a cool guy too. Nice person and he doesnt BS! NO BENDS & Tires were very good. </TD></TR></TABLE>

Thank you

GSR cams may be pending

-Ray

 

DAmn u did sell almost all ur items....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mannyman &raquo;</TD></TR><TR><TD CLASS="quote">DAmn u did sell almost all ur items.... </TD></TR></TABLE>

Yea this is the first time my goods have sold so effortlessly

**another item gone: GSR CAMS SOLD to EGWhore Thanks!

Make offer on distributor please!

Also...I might have 94-01 integra dual gauge pod (obx) up for sale soon (brand new).

maybe even some Brand new Pivot shift lights (made in japan )

Temporary link until i put up actual pictures of the ones (2 different kinds) i have for sale

http://www.pivotusa.com/shiftlamps/pivssl_m.htm
http://www.pivotusa.com/shiftlamps/pivssl_p.htm

-Ray

 

to the top

any interest in Pivot shift lights? Integra dual gauge bezel?