Lookin for some insight on my build!!?
Thread Starter
Joined: Mar 2006
Posts: 9
Likes: 0
From: Rochester, MN, USA
Lookin for some insight on my N/A LS build!!?
Ok for starters this is my first try at an all motor setup, so feel free to give me guidence!
build:
13:1 CR 81.5mm pistons
shotpeened LS rods modified for GSR bearings and Floating wrist pins and ARP bolts
ARP headstuds
mild ported B18b head
crower valvetrain
crower stg.2 cams
Blox IM
Blox 70mm TB
1 3/4in x 2.5in 4-1 style header
custom 3in intake
450 or 550cc injectors
walboro 255 fuel pump
chipped ECU running chrome pro
E85
GSR tranny
does that sound like a good setup to everyone.....feedback wanted!!
Modified by boostedcb7 at 5:52 PM 9/8/2008
build:
13:1 CR 81.5mm pistons
shotpeened LS rods modified for GSR bearings and Floating wrist pins and ARP bolts
ARP headstuds
mild ported B18b head
crower valvetrain
crower stg.2 cams
Blox IM
Blox 70mm TB
1 3/4in x 2.5in 4-1 style header
custom 3in intake
450 or 550cc injectors
walboro 255 fuel pump
chipped ECU running chrome pro
E85
GSR tranny
does that sound like a good setup to everyone.....feedback wanted!!
Modified by boostedcb7 at 5:52 PM 9/8/2008
Thread Starter
Joined: Mar 2006
Posts: 9
Likes: 0
From: Rochester, MN, USA
Re: (idrivesideways)
well the motor will be going into my 93 dx coupe.....the car weighs 2000lbs with me in it.....id like right around 190-195whp and a mid 12sec pass. i would like to think with this setup and the car being so light it just might work
Thread
Thread Starter
Forum
Replies
Last Post
bauergold
All Motor / Naturally Aspirated
25
Feb 6, 2010 10:51 PM
AnToNy
All Motor / Naturally Aspirated
8
May 8, 2006 08:08 PM