F/S: K24/k20 race parts getting out of the game part out list
Location Fresno CA
*** the pix where when everything was brand new...........
-the motor has been to 2 race event
-made a few passes on the dyno.....
-k20a2 head (this is a stock head)
-skunk2 pro serise valve springs and retainer
-skunk2 pro 3 cams
ASKING:1200.00
(i have some 1200cc if u need them +200 on top)
*<U>block</U>

-darton sleeves
-90mm custom wiseco pistons
-stroke 99mm
-cunninghan custom rods
-meziere electric water pump
-obd2 alternator
-go kart fluidyne radiator
-all lines and fittings
* will throw in a brand new head gasket 90mm bought from inlinepro
** when motor was put together the oil pump and timing chain was new
ASKING:3500.00
*<U>tranny</U>
-02 rsx type s
-very low miles
ASKING: 800.00
*<U>clutch</U>
-Competition Clutch twin disc
ASKING 800.00

my number is 559 577 4113 or 559 259 8462
ask for josh
*** the pix where when everything was brand new...........
-the motor has been to 2 race event
-made a few passes on the dyno.....
-k20a2 head (this is a stock head)
-skunk2 pro serise valve springs and retainer
-skunk2 pro 3 cams
ASKING:1200.00
(i have some 1200cc if u need them +200 on top)
*<U>block</U>

-darton sleeves
-90mm custom wiseco pistons
-stroke 99mm
-cunninghan custom rods
-meziere electric water pump
-obd2 alternator
-go kart fluidyne radiator
-all lines and fittings
* will throw in a brand new head gasket 90mm bought from inlinepro
** when motor was put together the oil pump and timing chain was new
ASKING:3500.00
*<U>tranny</U>
-02 rsx type s
-very low miles
ASKING: 800.00
*<U>clutch</U>
-Competition Clutch twin disc
ASKING 800.00

my number is 559 577 4113 or 559 259 8462
ask for josh
Last edited by sa90eg; Jan 16, 2009 at 11:45 AM. Reason: new pricing
**** u know i want the short block but i dont have that cash layin round
is it 3800 with the water sys? if so how much without? i need a street trim style setup
holla at me pimp and might be able to get something going.
is it 3800 with the water sys? if so how much without? i need a street trim style setup
holla at me pimp and might be able to get something going.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sa90eg »</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sa90eg »</TD></TR><TR><TD CLASS="quote">TTMFT
</TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2stepEK »</TD></TR><TR><TD CLASS="quote">Lots of nice parts!!!
</TD></TR></TABLE>
</TD></TR></TABLE>


