FS: Complete k20a3, rsx-s seats, complete em2 rear disc swap
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 4,971
Likes: 1
From: Wisconsin
FS: Complete k20a3, rsx-s seats, complete em2 rear disc swap
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
SELLING THIS THING FOR <FONT COLOR="red">$1000</FONT> IF PAYMENT MADE BEFORE FRIDAY. - PENDING
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
I need money asap and after that it's going back up.
k20a3
63,000 miles
Burns no noticeable oil
No tranny grinds/pop outs
It was babied. I let it warm up before driving, literally EVERYTIME. Stock internally, only mod was a short ram intake.
Comes with everything... accessories, im, em, mounts, axles, harness, ecu, etc minus idler pulley (needed for my swap). I can include an rsx-s power steering pump.
I also have a parts rsx-s if you need some parts to complete your k-swap (linkage, shifter base, etc).
Comes with unmodified valve cover (I also have spark plug cover and IM cover, both are included).
$1275 picked up.
-----------------------------------------------------------------------------------------
RSX-S seats
SOLD
-----------------------------------------------------------------------------------------
Rear disc swap - SOLD
It's going to sell for a bit more than the average em2 rear disc swap as I'm including all 4 hubs with skunk2 extended studs and lugs. They were installed right (pressed in and spot welded behind). They costed me $175 in parts and to get pressed.
Comes with:
- 2 front hubs with skunk2 extended studs
- 2 rear hubs with skunk2 extended studs
- 20 skunk2 extended lugs
- R&L rear calipers and brackets
- 2 rear axle nut caps
- R&L e-brake cables with brackets
- R&L rear brake lines with brackets
- R&L rear rotor shields
- R&L rear knuckle/spindles
- 4 used brake pads.
I *believe* this swap is complete. Please let me know if it's not, I could probably complete it.
Modified by WhiteOnRice at 8:30 AM 10/9/2008
Modified by WhiteOnRice at 1:54 PM 10/9/2008
SELLING THIS THING FOR <FONT COLOR="red">$1000</FONT> IF PAYMENT MADE BEFORE FRIDAY. - PENDING
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
I need money asap and after that it's going back up.
k20a3
63,000 miles
Burns no noticeable oil
No tranny grinds/pop outs
It was babied. I let it warm up before driving, literally EVERYTIME. Stock internally, only mod was a short ram intake.
Comes with everything... accessories, im, em, mounts, axles, harness, ecu, etc minus idler pulley (needed for my swap). I can include an rsx-s power steering pump.
I also have a parts rsx-s if you need some parts to complete your k-swap (linkage, shifter base, etc).
Comes with unmodified valve cover (I also have spark plug cover and IM cover, both are included).
$1275 picked up.
-----------------------------------------------------------------------------------------
RSX-S seats
SOLD
-----------------------------------------------------------------------------------------
Rear disc swap - SOLD
It's going to sell for a bit more than the average em2 rear disc swap as I'm including all 4 hubs with skunk2 extended studs and lugs. They were installed right (pressed in and spot welded behind). They costed me $175 in parts and to get pressed.
Comes with:
- 2 front hubs with skunk2 extended studs
- 2 rear hubs with skunk2 extended studs
- 20 skunk2 extended lugs
- R&L rear calipers and brackets
- 2 rear axle nut caps
- R&L e-brake cables with brackets
- R&L rear brake lines with brackets
- R&L rear rotor shields
- R&L rear knuckle/spindles
- 4 used brake pads.
I *believe* this swap is complete. Please let me know if it's not, I could probably complete it.
Modified by WhiteOnRice at 8:30 AM 10/9/2008
Modified by WhiteOnRice at 1:54 PM 10/9/2008
Trending Topics
Re: FS: Complete k20a3, rsx-s seats, complete em2 rear disc swap (WhiteOnRice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteOnRice »</TD></TR><TR><TD CLASS="quote">
Rear disc swap - BO
It's going to sell for a bit more than the average em2 rear disc swap as I'm including all 4 hubs with skunk2 extended studs and lugs. They were installed right (pressed in and spot welded behind). They costed me $175 in parts and to get pressed.
Comes with:
- 2 front hubs with skunk2 extended studs
- 2 rear hubs with skunk2 extended studs
- 20 skunk2 extended lugs
- R&L rear calipers and brackets
- 2 rear axle nut caps
- R&L e-brake cables with brackets
- R&L rear brake lines with brackets
- R&L rear rotor shields
- R&L rear knuckle/spindles
- 4 used brake pads.
I *believe* this swap is complete. Please let me know if it's not, I could probably complete it.
</TD></TR></TABLE>
me likie, pm'd
Rear disc swap - BO
It's going to sell for a bit more than the average em2 rear disc swap as I'm including all 4 hubs with skunk2 extended studs and lugs. They were installed right (pressed in and spot welded behind). They costed me $175 in parts and to get pressed.
Comes with:
- 2 front hubs with skunk2 extended studs
- 2 rear hubs with skunk2 extended studs
- 20 skunk2 extended lugs
- R&L rear calipers and brackets
- 2 rear axle nut caps
- R&L e-brake cables with brackets
- R&L rear brake lines with brackets
- R&L rear rotor shields
- R&L rear knuckle/spindles
- 4 used brake pads.
I *believe* this swap is complete. Please let me know if it's not, I could probably complete it.
</TD></TR></TABLE>
me likie, pm'd
