Well im rounding my final stages of my g22 build but im stuck on one thing. Compression ratio. Nobody seems to know anything on the dohc f22b (neither do I ) so I cant figure out my cr. I found a post a while back by satan and he linked the guy to a site saying it was 9:5.1. If that is correct then with a h22 head that would put right around 9:1 correct. Somebody must know something on the motor or at least somebody reassure me that my cr. is about right so I can get this thing in the car. Thanks.

https://honda-tech.com/zerothread?id=612451 Link mentioned above. The link he posted is all japanese but you can see the cr is at 9:5.1 right below the bore x stroke. Again thanks for any help

 

the f22b is 9:3.1...check at the bottom of the page
http://en.wikipedia.org/wiki/Honda_F_engine

 

No disrespect but wikipedia is all what peole put. Whether it be fact or opion. The link I posted is directly from honda. Im gonna trust there judgement over people on wikipedia.

 

Somebody...please

 

Somebody has to know

 

http://babelfish.yahoo.com/tra...slate

Sometimes you have to think outside the box.

You will end up a hair above 9.0:1