FS: Some UKDM and D-series parts
Thread Starter
Joined: May 2006
Posts: 7
Likes: 0
From: SoCal
FS: Some UKDM and D-series parts
Alright, going to try to clear out some stuff that I have sitting around. Prices don't include shipping, because I have no idea how much shipping is. Make me any offer. It would nice to see it go to good use instead of sitting in my shed!
Some parts are at 90803, others at 92399 in case you want to pick anything up in person.
Payments accepted:
Paypal (i_already_know@hotmail.com)
Check/Money Oder (must clear before shipping)
Cash
-CRX JDM/EDM/UKDM rear seat. Includes Upper and lower cushions, rear carpet, side cups, seat belts, hardware. <FONT COLOR="blue">$300</FONT>
-UKDM VT gauge cluster. Superior to JDM because the Speedo is in MPH! It was taken apart to put white face plates on it buy the previous owner in England, but he broke the temperature gauge needle in half. Swap the Speedo and Tach into your cluster or put your temperature gauge needle into this one. The broken needle will be included and could be super-glued together as another option. <FONT COLOR="blue">$200</FONT>
-UKDM 16v gauge cluster. Superior to JDM because the Speedo is in MPH! This cluster was meant for a zc engined car. So if thats what you've got, then this is for you. Tach gives you a higher redline and Speedo is 150mph. <FONT COLOR="blue">$200</FONT>
Fog lamps from Harbor Freight. They are close to the OEM size and are yellow, but I felt they were too big. Many people have used these with varying degrees of success. Anyway, they're basically new. <FONT COLOR="blue">$30</FONT>
-D16A6 parts. Just pulled this out of my car, its a 91 Si motor with about 130k miles on it. Let me know if you are interested in any stock parts. <FONT COLOR="blue">Offers?</FONT>
-D16Z6 Cast Exhaust Header. <FONT COLOR="blue">$75</FONT>
- D16Z6 Intake Manifold. Complete with throttle body, sensors, injectors and fuel rail. <FONT COLOR="blue">$100</FONT>
- D16Y8 Cylinder Head. <FONT COLOR="blue">$150</FONT>
- OBD1 Distributor with Y8 bolt pattern. <FONT COLOR="blue">$60</FONT>
-Crower D16Y8 Stage 2 Camshaft. New in the box. Can also be used in a Z6 from what I understand, but needs a timing adjustment with an adjustable cam gear. <FONT COLOR="blue">$200</FONT>
-Crower Adjustable Cam Gear. Used for a very short while on my mini-me. Still in great condition. <FONT COLOR="blue">$100</FONT>
[this is a pic from crower's website, but it can be seen on the motor pic above]
I've got some other stuff, but I'll have to dig it up.
Some parts are at 90803, others at 92399 in case you want to pick anything up in person.
Payments accepted:
Paypal (i_already_know@hotmail.com)
Check/Money Oder (must clear before shipping)
Cash
-CRX JDM/EDM/UKDM rear seat. Includes Upper and lower cushions, rear carpet, side cups, seat belts, hardware. <FONT COLOR="blue">$300</FONT>
-UKDM VT gauge cluster. Superior to JDM because the Speedo is in MPH! It was taken apart to put white face plates on it buy the previous owner in England, but he broke the temperature gauge needle in half. Swap the Speedo and Tach into your cluster or put your temperature gauge needle into this one. The broken needle will be included and could be super-glued together as another option. <FONT COLOR="blue">$200</FONT>
-UKDM 16v gauge cluster. Superior to JDM because the Speedo is in MPH! This cluster was meant for a zc engined car. So if thats what you've got, then this is for you. Tach gives you a higher redline and Speedo is 150mph. <FONT COLOR="blue">$200</FONT>
Fog lamps from Harbor Freight. They are close to the OEM size and are yellow, but I felt they were too big. Many people have used these with varying degrees of success. Anyway, they're basically new. <FONT COLOR="blue">$30</FONT>
-D16A6 parts. Just pulled this out of my car, its a 91 Si motor with about 130k miles on it. Let me know if you are interested in any stock parts. <FONT COLOR="blue">Offers?</FONT>
-D16Z6 Cast Exhaust Header. <FONT COLOR="blue">$75</FONT>
- D16Z6 Intake Manifold. Complete with throttle body, sensors, injectors and fuel rail. <FONT COLOR="blue">$100</FONT>
- D16Y8 Cylinder Head. <FONT COLOR="blue">$150</FONT>
- OBD1 Distributor with Y8 bolt pattern. <FONT COLOR="blue">$60</FONT>
-Crower D16Y8 Stage 2 Camshaft. New in the box. Can also be used in a Z6 from what I understand, but needs a timing adjustment with an adjustable cam gear. <FONT COLOR="blue">$200</FONT>
-Crower Adjustable Cam Gear. Used for a very short while on my mini-me. Still in great condition. <FONT COLOR="blue">$100</FONT>
[this is a pic from crower's website, but it can be seen on the motor pic above]
I've got some other stuff, but I'll have to dig it up.
Thread
Thread Starter
Forum
Replies
Last Post
VisualAutoMotoring
Miscellaneous - Appearance - Lighting
26
Oct 25, 2006 03:59 AM