turbo, headers, slicks, oem parts and more d and b series
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 9,820
Likes: 12
From: schooling kids in ny, usa
turbo, headers, slicks, oem parts and more d and b series
2 slicks. 24.5x8.5x13 mounted on bogart flystars 4x100 fit civic and integra. about 10 passes with tons of life left. $400.-- *****sold to ajxr******
84mm aebs sleeved ls block. comes with tapped oil pan, oil pickup and maincaps. block is in good condition, i would hone and deck just because its good practice. sold!!!!!!!
turbo kit for sohc hondas, piping fits eg/del sol chassis with no mods. Lovefab ramhorn manifold/3"dp and stainless dump, tial 38mm gate with ~9psi spring, turbo xs bov, decent sized front mount, garrett t25 so it will have great spool. all parts have normal wear. This is not cheap ebay stuff!!!$1100 ----
The following parts are for sale on a make me a not scumbag lowball offer:::
90 crx si transmission ---sold to ajxr
2 dc headers for d series sohc (used)---sold to dntbh8n
k&n 4" filter (brand new)--
2 brand new autozone rear struts for 96-00 civic -- sold to dntbh8n
2 aerospeed slip over coilovers on blown eg struts (used)--
grey front seats from 97 civic. drivers has rip on seam, good condition besides-
sohc shift linkage for d16 out of 97 coupe --
d16 flywheel, good condition clutch and ive got 3 oem pressure plates --
tail lights from 97 civic coupe --
front corner lights from 93 civic coupe --
clear corners for 88-91 4dr civic --
oem b16 timing belt (brand new)--
97 hx d16y5 head (needs refresh been sitting a while) and distributor --
obd0 and obd1 ls intake manifolds (both are bare, obd1 painted black) --
2 starters for d series, i think they are for cable trans --
few random motor mounts --
1 set sirII 170hp b16 cams in good condition --
b16 oem valvesprings --
d16 oem valvesprings --
halfshaft from 87 integra --
red hood and drivers fender from 88-91 civic hatch. pretty good condition ----..
i'm not shipping anything large. pm me with questions or to work out prices. parts are located in the hudson valley, ny.
check here for some pics http://hudsonvalley.craigslist....html thanks!
Modified by blackeg at 11:41 PM 8/24/2008
Modified by blackeg at 10:11 PM 9/2/2008
Modified by blackeg at 9:51 PM 9/21/2008
84mm aebs sleeved ls block. comes with tapped oil pan, oil pickup and maincaps. block is in good condition, i would hone and deck just because its good practice. sold!!!!!!!
turbo kit for sohc hondas, piping fits eg/del sol chassis with no mods. Lovefab ramhorn manifold/3"dp and stainless dump, tial 38mm gate with ~9psi spring, turbo xs bov, decent sized front mount, garrett t25 so it will have great spool. all parts have normal wear. This is not cheap ebay stuff!!!$1100 ----
The following parts are for sale on a make me a not scumbag lowball offer:::
90 crx si transmission ---sold to ajxr
2 dc headers for d series sohc (used)---sold to dntbh8n
k&n 4" filter (brand new)--
2 brand new autozone rear struts for 96-00 civic -- sold to dntbh8n
2 aerospeed slip over coilovers on blown eg struts (used)--
grey front seats from 97 civic. drivers has rip on seam, good condition besides-
sohc shift linkage for d16 out of 97 coupe --
d16 flywheel, good condition clutch and ive got 3 oem pressure plates --
tail lights from 97 civic coupe --
front corner lights from 93 civic coupe --
clear corners for 88-91 4dr civic --
oem b16 timing belt (brand new)--
97 hx d16y5 head (needs refresh been sitting a while) and distributor --
obd0 and obd1 ls intake manifolds (both are bare, obd1 painted black) --
2 starters for d series, i think they are for cable trans --
few random motor mounts --
1 set sirII 170hp b16 cams in good condition --
b16 oem valvesprings --
d16 oem valvesprings --
halfshaft from 87 integra --
red hood and drivers fender from 88-91 civic hatch. pretty good condition ----..
i'm not shipping anything large. pm me with questions or to work out prices. parts are located in the hudson valley, ny.
check here for some pics http://hudsonvalley.craigslist....html thanks!
Modified by blackeg at 11:41 PM 8/24/2008
Modified by blackeg at 10:11 PM 9/2/2008
Modified by blackeg at 9:51 PM 9/21/2008
Trending Topics
Honda-Tech Member
Joined: Aug 2005
Posts: 1,460
Likes: 2
From: NY, USA
Re: turbo, headers, slicks, oem parts and more d and b series (blackeg)
bump for a good seller
ive been buying stuff from this guy for a couple years, all legit, honest dude.
matt might take you up on the si trans, ef hood, and possibly those 2 coilovers depending on how much fender elimination ill be needing.
ive been buying stuff from this guy for a couple years, all legit, honest dude.
matt might take you up on the si trans, ef hood, and possibly those 2 coilovers depending on how much fender elimination ill be needing.
Honda-Tech Member
Joined: Nov 2002
Posts: 3,826
Likes: 0
From: on the hudson
Re: turbo, headers, slicks, oem parts and more d and b series (AJxr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AJxr »</TD></TR><TR><TD CLASS="quote">bump for a good seller
ive been buying stuff from this guy for a couple years, all legit, honest dude.
</TD></TR></TABLE>
same here, good guy
ive been buying stuff from this guy for a couple years, all legit, honest dude.
</TD></TR></TABLE>
same here, good guy
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 9,820
Likes: 12
From: schooling kids in ny, usa
Re: turbo, headers, slicks, oem parts and more d and b series (elmalouno)
thanks guys
hey aj, how'd that 1.7 60ft feel with them slicks
Modified by blackeg at 11:41 PM 8/24/2008
hey aj, how'd that 1.7 60ft feel with them slicks
Modified by blackeg at 11:41 PM 8/24/2008
