:::<<Getting out of the gam sale>>:::
Thread Starter
Senior Member
Joined: Feb 2007
Posts: 199
Likes: 0
From: NJ, Us
:::<<Getting out of the gam sale>>:::
Need these parts gone like yesterday because I have other plans. No lowballers but I will take reasonable offers..Any questions, I/M me.
Motor stuff:
&&I have parpers for both the tranny and the block&&
--99' B16a2 block vin#Vin#1hgem1159xl070942-$250
--99' B16 trans, shifts well no stories.Vin#1hgem1159xl070942-$400
--99' Valve spring and retainers-$10
--99' Stock B16a2 cams-$30 FIRM
--99' B16a2 head, Milled 0.020, Buddy club spec 3 cams, springs and retainers, new valve seals, guides-$700 FIRMM (No dizzy or intake mani)
--Obd1 B16 dizzy-$85
--Hytec tri-y big tube-$350, Used 500 miles
--Rc 310 injectors Obd1-$200
--Vortech Fmu-$40
--R&D Thermal research exhaust(rear section)-$100
--Obd2 B16 starter, works well-$30
--P28 timing blet motor mount(the big one)-$20
--Obd1 single cam alternators-$20 a piece
--Obd0 B16 starter, works well-$20
--Obd1 B16 alternator-$20
--B series axels, NON abs-$50 for both
Ecu's and electronics:
--P06 ecu converted to p28-$80
--P28 chipped on chrome for boost, reads 3 bar map $175
--Obd1 Vtec harness-$100
--AutoMeter Boost gauge(silver face)-$20
--AutoMeter carbonfiber oil press-$20
--AutoMeter rpm activated switch-$20
Others/Eg interior:
--Eg coupe MINT BLACK interior minus door panels-$300 FOR EVERTHING:
Seats, carpet, complete dash, cluster, center console..Any panel/thing in the interior I want $300 complete.
--Eg coupe head light assembly, Complete-$80
--Eg Tokico blues with coilover-$100
--90-91 Crx pass side tail light-$10
--Jdm Crx marker lights-$10
--Eg Mugen front shock tower brace-$50
You come to me, Located in South Jersey, Exit 3 off the NJTP.
Email me @ jbuttocovla@yahoo.com or ask questions here, I will refer to this thread.<U></U>
Motor stuff:
&&I have parpers for both the tranny and the block&&
--99' B16a2 block vin#Vin#1hgem1159xl070942-$250
--99' B16 trans, shifts well no stories.Vin#1hgem1159xl070942-$400
--99' Valve spring and retainers-$10
--99' Stock B16a2 cams-$30 FIRM
--99' B16a2 head, Milled 0.020, Buddy club spec 3 cams, springs and retainers, new valve seals, guides-$700 FIRMM (No dizzy or intake mani)
--Obd1 B16 dizzy-$85
--Hytec tri-y big tube-$350, Used 500 miles
--Rc 310 injectors Obd1-$200
--Vortech Fmu-$40
--R&D Thermal research exhaust(rear section)-$100
--Obd2 B16 starter, works well-$30
--P28 timing blet motor mount(the big one)-$20
--Obd1 single cam alternators-$20 a piece
--Obd0 B16 starter, works well-$20
--Obd1 B16 alternator-$20
--B series axels, NON abs-$50 for both
Ecu's and electronics:
--P06 ecu converted to p28-$80
--P28 chipped on chrome for boost, reads 3 bar map $175
--Obd1 Vtec harness-$100
--AutoMeter Boost gauge(silver face)-$20
--AutoMeter carbonfiber oil press-$20
--AutoMeter rpm activated switch-$20
Others/Eg interior:
--Eg coupe MINT BLACK interior minus door panels-$300 FOR EVERTHING:
Seats, carpet, complete dash, cluster, center console..Any panel/thing in the interior I want $300 complete.
--Eg coupe head light assembly, Complete-$80
--Eg Tokico blues with coilover-$100
--90-91 Crx pass side tail light-$10
--Jdm Crx marker lights-$10
--Eg Mugen front shock tower brace-$50
You come to me, Located in South Jersey, Exit 3 off the NJTP.
Email me @ jbuttocovla@yahoo.com or ask questions here, I will refer to this thread.<U></U>
Thread
Thread Starter
Forum
Replies
Last Post