how do you do a drive cycle for a GSR?

 

ttt

 

any1?

 

There are specific drive cycles for each monitor. Also the drive cycles have different criteria for each of the monitors.

I would just drive the car for 75 miles. Go 35miles and take a break for an hour or so then drive back and most of them should be set.

An example of a drive cycle would be like... drive the car between 30 and 40 miles an hour for 5 minutes without stopping.

 

Try this.
- Warm up the engine by driving.
- Idle for 2min.
- Drive @ 40mph or higher steady cruise for 15min
- Idle for 2min.
- Drive @ 40mph or higher steady cruise for 15min