FS: Crower, GSR, LS/Vtec, B18A1 shortblock, 99-00 SI wireharness, GE and more!
FS: Crower, GSR, LS/Vtec, B18A1 shortblock, 99-00 SI wireharness, GE and more!
Wiling to trade for a complete d16y7 head! Preferebly OBD2B.
*** NEED TO SELL ASAP *** MAKE OFFER. JUST NO LOW BALLIN'.
-GSR Head- $make offer
*Was told it was ported and polished by DG motors?
*Everything is Disassembled
- Slightly used Crower Dual valve springs for Bseries
with brand New Crower Chromoly Retainers for bseries/h22 $280
-Ferrera Valves for Bseries *used* $200
-GSR Cams $80
-GSR Head- $450 or B/O
has around 40k. stock.
-GSR DOCH Vtec VC $50
-GSR Intake Manifold with Butterfly valves removed $50
-GSR Tranny $400
unknown miles, but was told it shifted fine and dandy
-AEM Fuel Rail Silver *some scratches* $70
-LS block $675
*Machine work done at DG Motors Hottank/Bore/Honed/Micropolished Crank over $350+ in machine work! Decked .007. Guy can vouch for me @ DG.
*PR3 Pistons 81.5mm w/ Hastings Rings on PR4 rods with ARP hardware
*Brand new OEM Vtec Oil Pump and Water pump
*ACL bearings
*Still wrapped up. Assembled by me and my buddy who works at Metric Auto.
-NEW GSR/ITR Golden Eagle Headstuds $75
-Golden Eagle Ls/Vtec Kit w/out Headgasket $125
-99-00 SI wireharness. 1 Plug is cut not sure. $90 or B/O
-B20Z pistons and Rods $50
-B20Z oil pan, windage tray, and oil pickup $50
- NEW Wiseco Pistons 84.5mm High compression pistons w/ slightly used Eagle Rods $600
-LS camshafts $10
-LS Valve cover obd1 $10
-00' Civic wheel covers $40
-FS\WTT: Rota JSPL Silver with Polished up. Will need new tires. $450 add $50 for Bull Locks and Muteki Lug nuts. trade for LS Meshies + cash.
**Also my car is for sale. It will be up in the autoplace soon. WTT for IS300, Accord 4dr, Fit, Camry 4dr etc. Small SUV's will be taken into consideration. I can add $$ on my part. *must be 4dr* $4500 or B/O.
Modified by chippy at 1:43 PM 7/17/2008
Modified by chippy at 1:44 PM 7/17/2008
Modified by chippy at 1:45 PM 7/17/2008
*** NEED TO SELL ASAP *** MAKE OFFER. JUST NO LOW BALLIN'.
-GSR Head- $make offer
*Was told it was ported and polished by DG motors?
*Everything is Disassembled
- Slightly used Crower Dual valve springs for Bseries
with brand New Crower Chromoly Retainers for bseries/h22 $280
-Ferrera Valves for Bseries *used* $200
-GSR Cams $80
-GSR Head- $450 or B/O
has around 40k. stock.
-GSR DOCH Vtec VC $50
-GSR Intake Manifold with Butterfly valves removed $50
-GSR Tranny $400
unknown miles, but was told it shifted fine and dandy
-AEM Fuel Rail Silver *some scratches* $70
-LS block $675
*Machine work done at DG Motors Hottank/Bore/Honed/Micropolished Crank over $350+ in machine work! Decked .007. Guy can vouch for me @ DG.
*PR3 Pistons 81.5mm w/ Hastings Rings on PR4 rods with ARP hardware
*Brand new OEM Vtec Oil Pump and Water pump
*ACL bearings
*Still wrapped up. Assembled by me and my buddy who works at Metric Auto.
-NEW GSR/ITR Golden Eagle Headstuds $75
-Golden Eagle Ls/Vtec Kit w/out Headgasket $125
-99-00 SI wireharness. 1 Plug is cut not sure. $90 or B/O
-B20Z pistons and Rods $50
-B20Z oil pan, windage tray, and oil pickup $50
- NEW Wiseco Pistons 84.5mm High compression pistons w/ slightly used Eagle Rods $600
-LS camshafts $10
-LS Valve cover obd1 $10
-00' Civic wheel covers $40
-FS\WTT: Rota JSPL Silver with Polished up. Will need new tires. $450 add $50 for Bull Locks and Muteki Lug nuts. trade for LS Meshies + cash.
**Also my car is for sale. It will be up in the autoplace soon. WTT for IS300, Accord 4dr, Fit, Camry 4dr etc. Small SUV's will be taken into consideration. I can add $$ on my part. *must be 4dr* $4500 or B/O.
Modified by chippy at 1:43 PM 7/17/2008
Modified by chippy at 1:44 PM 7/17/2008
Modified by chippy at 1:45 PM 7/17/2008
Joined: Jan 2006
Posts: 393
Likes: 0
From: OMAHA, Ne, u
Re: FS: Crower, GSR, LS/Vtec, B18A1 shortblock, 99-00 SI wireharness, GE and more! (chippy)
is there anything else hacked off the harness pm me or email at mookie86@***.net
Thread
Thread Starter
Forum
Replies
Last Post
chippy
For Sale
5
Aug 22, 2008 04:35 AM
aser1z
For Sale
3
Dec 25, 2007 02:27 PM
