Wont rev past 1k with chipped po6!! HELP
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 383
Likes: 0
From: storrs, CT, 06850
Wont rev past 1k with chipped po6!! HELP
Ok guys heres my setup
1998 Honda prelude 5 speed
Engine: Naturally aspirated JDM F20B DOHC VTEC
Situation:
Cars runs on Stock obd2 ecu but runs a little rich. T
he car throws no codes.
Runs perfectly but havent reved it past 4k for safety.
The only thing not working is my speedometer(once again no CEL).
I am trying to tune the car with my friend on Chrome pro.
We are using an obd2a-obd1 conversion harness and chipped po6/with vtec
The car idles fine but wont rev past 1.5k rpm while moving. Sometimes it will rev past 1.5k when the car is at a stand still, sometimes it wont. It feels as if there is a rev limiter. Can this be related to the Vss?
We tested the ecu in his integra and his car ran perfectly!
Once again i plugged in the stock ecu and car runs perfectly!
Thank you very much for your help and I will give money to the person who helps me solve my problem.
1998 Honda prelude 5 speed
Engine: Naturally aspirated JDM F20B DOHC VTEC
Situation:
Cars runs on Stock obd2 ecu but runs a little rich. T
he car throws no codes.
Runs perfectly but havent reved it past 4k for safety.
The only thing not working is my speedometer(once again no CEL).
I am trying to tune the car with my friend on Chrome pro.
We are using an obd2a-obd1 conversion harness and chipped po6/with vtec
The car idles fine but wont rev past 1.5k rpm while moving. Sometimes it will rev past 1.5k when the car is at a stand still, sometimes it wont. It feels as if there is a rev limiter. Can this be related to the Vss?
We tested the ecu in his integra and his car ran perfectly!
Once again i plugged in the stock ecu and car runs perfectly!
Thank you very much for your help and I will give money to the person who helps me solve my problem.
Thread
Thread Starter
Forum
Replies
Last Post
nipcup101
Honda CRX / EF Civic (1988 - 1991)
18
Jan 7, 2008 11:14 PM
