87.5mm CP pistons and Eagle rods w/ARP2000 bolts. Everything has been balanced. Checked by a machine shop to make SURE they are good.

Entire balanced rod/piston assy. No rings... Worked perfectly in my motor, they have about 5K-6K on them. Going to Pauter rods and bigger bore so need to get rid of them. Pistons are in PERFECT shape, as are the rods.

I made 600WHP without incident on these. Shooting for 800 this time, so need to upgrade rods. Boring the motor out to 88mm so these pistons wont work.


They are CLEAN and ready to go!!!!