Help me analyse my dyno plot - JDM B16a G2 Integra
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 281
Likes: 0
From: Wgtn, NZ, NZ
Help me analyse my dyno plot - JDM B16a G2 Integra
1st gen. B16a - Stock cams with i/h/e, fuel pressure regulator and Field SFC tuning.
Torque: 567/drive ratio: 4.9 = 115.7ft/lbs@7389rpm
I want to get the power curve more linear. How do I get rid of that dip at 5000rpm? Vtec point is set to 5400rpm.
TIA
Torque: 567/drive ratio: 4.9 = 115.7ft/lbs@7389rpm
I want to get the power curve more linear. How do I get rid of that dip at 5000rpm? Vtec point is set to 5400rpm.
TIA
Thread
Thread Starter
Forum
Replies
Last Post
