ok so I searched the FAQ's and such and couldn't find anything on this..

I wrecked my eg coupe with a z6 and was given an ef hatch for free (minus the wiring and motor). I still have all the wiring from my eg and was wondering if I could just use my entire harness from the eg with my p28 and pin up the gauge cluster instead of trying to get ef wiring?

 

Bump

 

That would be a lot of work. I don't think it would work.

 

well there was absolutely no wiring in the car for anything under the hood it was stripped out clear back to the ecu. He had a z6 in it before and didn't run a jumper harness so he took it all for his new hatch. so im left with no plug for the under dash stuff and no under hood wiring.

 

well there was absolutely no wiring in the car for anything under the hood it was stripped out clear back to the ecu. He had a z6 in it before and didn't run a jumper harness so he took it all for his new hatch. so im left with no plug for the under dash stuff and no under hood wiring.

 

oops double post

 

^

 

i've seen it done on an ef9 and it worked hes running a gsr and no probles he did everything taillights headlights it works