i really want to know if someone could tell me word for word or give me a good link on how to do the wiring! at first i thought there was something wrong with the motor i had turns out its fine. but the wiring for the zc is making it throw a 4,9,10. and i read up on some stuff and it says because two wires that go in the dizzy are out of it on the zc so i wanna know how u make it work again. lmk thanks alot to every person that helps.


i really wanna get this done today thanks again everyone.

could someone please help me out and lmk what wires do i need to change. the previous owner did the mpfi converson but for a zc dual cam and now i put a d16y7 in and really need to know how to wire it up its in and ready to go but wont rev over 3. and bogs. so please someone help me. pictures would help alot but i just want to have it fixed thanks.


Modified by RazorsRacing at 6:17 PM 7/9/2008

 

your CYP sensor is wired to the ZC sensor. Just wire those two wires back into the dizzy for the 2 wires you are missing. Consult your wiring diagram to make sure you have the right ecu pins going to the right dizzy wire colors, since someone has manually ran wires in that car.

 

so whats up no one could help me or what. whats the point of even having this????