I presently have B16a cams and Integra Type R springs on the intake and exhaust, would like to upgrade to Stage 1 cam. Can be Skunk2 or other brand, just not OBX or similar.

Also, question, the Lost motion assemblies , I have regular B16a ones, do I need to or what are the benefits of installing ITR ones.

Thanks
please send note/quote to difvisionnn@hotmail.com

Setup.
LSVTEC/PR3 piston/DC sports USDM with 2.5 collector mod/AEM short ram/270cc injectors/ VAFC/P30 ECU... only 165 whp..<U></U> .would like more with cams. It is VAFC tuned like 10 to + 20% in most of the power band.

Was thinking to
1- phearable.net burnt chip to have better base timing and fine tune with VAFC
2- Stage 1 cam (do not want to upgrade valvetrain) or want to rev higher than 8k really (Have already gone through bearings and actually blown one LSVTEC up, so I stay away from 8500 + rpm)

Thanks

 

I've got Crane Cam Stage one Cams.. Brand New never used, still in the box...cost 600 will sell for a lot less!

Let me know if you're interested!

Thanks

shane