ok nobody wanted to answer these question on my other post. so will someone answer it here? How much hp/tq can stock LS sleeves hold? and if it cant hold over 400, how do i go about resleeving the block?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teg_95 &raquo;</TD></TR><TR><TD CLASS="quote">ok nobody wanted to answer these question on my other post. so will someone answer it here? How much hp/tq can stock LS sleeves hold? and if it cant hold over 400, how do i go about resleeving the block?</TD></TR></TABLE>

I've seen over 500 whp on stock ls sleeves, don't remember torque though.

 

if your planning on making around 400, stock sleeves are fine

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecb18c &raquo;</TD></TR><TR><TD CLASS="quote">if your planning on making around 400, stock sleeves are fine</TD></TR></TABLE>
thats if you have a good tune...any detonation at that power level will crack the sleeve easily

 

agreed. just spend good money on a fine tune

 

so anything over around 400hp needs to be resleeved. Because im looking to build maybe an 11 second eg

 

400 is fine on the stock sleeves but it will HAVE to be forged internals