fs 1989 honda crx si built dohc zc
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 90
Likes: 0
From: Dtown, ohio, united states
sellin my 89 crx si thats mildly built with high compression. had the car for about a year and a half and now im wanting to buy a dsm so i gotta get rid of this rex. runs great have never had any trouble with it and is really light and quick, no tranny grinds whatsoever..runs on synthetic and 93 octane always and is well maintained. car weighs approximately 1700 lbs
-1.6l dohc zc (10,000mi on build)
-stainless headers
-obx catback to ansa axelback(rnr replica)
-carbon fiber intake
-cp pistons 12.1
-eagle h beams
-acl bearings
--custom stainless traction bar
-stainless fuel rail and braided lines
-nology hot wires
-full integra ls suspension with rear disk
-hawk hp race pads all around
-headwork done by frogg along with the tune
-ground control suspension
-push button start
-stainless pedals
-momo race wheel
-short throw
-race mounts with poly bushings
-energy suspension red bushings all around
- pass side race seat, 2 race harnesses
-moroso oil pan
-carbon fiber oil and water temp gauges and cf oil pressure,af and volts
-aluminum radiator with 2 slim fans
-arp headstuds
-stage 2 race clutch
-phantom grip
negatives...
-hit a deer and needs quarter panel work or a replacement one and the tailight cracked also.
-doors are gutted with sealed plexiglass windows, have mint white stock doors for it. back window is plexiglass also.
-car is completely gutted. but have mostly all the interior to go with it.
car is located in dalton ohio
price=2500 firm cash only no trades














Modified by x91crxsix at 4:21 PM 7/15/2008
-1.6l dohc zc (10,000mi on build)
-stainless headers
-obx catback to ansa axelback(rnr replica)
-carbon fiber intake
-cp pistons 12.1
-eagle h beams
-acl bearings
--custom stainless traction bar
-stainless fuel rail and braided lines
-nology hot wires
-full integra ls suspension with rear disk
-hawk hp race pads all around
-headwork done by frogg along with the tune
-ground control suspension
-push button start
-stainless pedals
-momo race wheel
-short throw
-race mounts with poly bushings
-energy suspension red bushings all around
- pass side race seat, 2 race harnesses
-moroso oil pan
-carbon fiber oil and water temp gauges and cf oil pressure,af and volts
-aluminum radiator with 2 slim fans
-arp headstuds
-stage 2 race clutch
-phantom grip
negatives...
-hit a deer and needs quarter panel work or a replacement one and the tailight cracked also.
-doors are gutted with sealed plexiglass windows, have mint white stock doors for it. back window is plexiglass also.
-car is completely gutted. but have mostly all the interior to go with it.
car is located in dalton ohio
price=2500 firm cash only no trades














Modified by x91crxsix at 4:21 PM 7/15/2008
Thread
Thread Starter
Forum
Replies
Last Post




