can i put a jdm b16 on my 93 integra

 

why would you put a JDM b16 ON your integra?

 

yes you can is a direct bolt in and you only have to do a little bit of wiring, the only prob is you are loosing a lot of torque with the b16.

 

it will help if your integra is really low and your engine hoist goes really high might need a buddy to give it a extra boost to the top. your gunna need to fab some special mounts to keep a b16 on your teg, wind resistence will be the biggest factor but with that there will be no reason to run a rad just air cool it.

for wiring your gunna have to get creative you might be able to get a stream line look if you run the wires through your interior light and duct tape it to the back of the block.
exhaust phuk it

intake might as well get ITB's since your spending the money to put a b16 on your teg.

fuel screw it your running this bitch on self satisfaction, so your gunna need the new mugen head pulse width thought enhancer to get this thing redlining..

I think thats it if I missed anything please add

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegra2G &raquo;</TD></TR><TR><TD CLASS="quote">it will help if your integra is really low and your engine hoist goes really high might need a buddy to give it a extra boost to the top. your gunna need to fab some special mounts to keep a b16 on your teg, wind resistence will be the biggest factor but with that there will be no reason to run a rad just air cool it.

for wiring your gunna have to get creative you might be able to get a stream line look if you run the wires through your interior light and duct tape it to the back of the block.
exhaust phuk it

intake might as well get ITB's since your spending the money to put a b16 on your teg.

fuel screw it your running this bitch on self satisfaction, so your gunna need the new mugen head pulse width thought enhancer to get this thing redlining..

I think thats it if I missed anything please add</TD></TR></TABLE>

LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

Tegra what the hell are you talking about? air cooled???what is this a 70 bug were talking bout here? jesus when i thought it couldnt get any worse..........

 

just get an ls block or b20 and just put the vtec head on that, not sure about the wiring on that year model but i know its not that difficult on a 95 teg,how much different could it be its a honda!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegra2G &raquo;</TD></TR><TR><TD CLASS="quote">it will help if your integra is really low and your engine hoist goes really high might need a buddy to give it a extra boost to the top. your gunna need to fab some special mounts to keep a b16 on your teg, wind resistence will be the biggest factor but with that there will be no reason to run a rad just air cool it.

for wiring your gunna have to get creative you might be able to get a stream line look if you run the wires through your interior light and duct tape it to the back of the block.
exhaust phuk it

intake might as well get ITB's since your spending the money to put a b16 on your teg.

fuel screw it your running this bitch on self satisfaction, so your gunna need the new mugen head pulse width thought enhancer to get this thing redlining..

I think thats it if I missed anything please add</TD></TR></TABLE>


hahahahahahahahahahahahahhaahahahhahahahahahahaha omfg! thats genious

 

you should do a b20/vtec or ls/vtec....like the guy before me said you will be losing some torque if you throw a b16 in there....my buddy went through the whole ordeal and i told him he wasnt going to be happy but he didnt listen and now he's kicking himself for not listening.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegra2G &raquo;</TD></TR><TR><TD CLASS="quote">it will help if your integra is really low and your engine hoist goes really high might need a buddy to give it a extra boost to the top. your gunna need to fab some special mounts to keep a b16 on your teg, wind resistence will be the biggest factor but with that there will be no reason to run a rad just air cool it.

for wiring your gunna have to get creative you might be able to get a stream line look if you run the wires through your interior light and duct tape it to the back of the block.
exhaust phuk it

intake might as well get ITB's since your spending the money to put a b16 on your teg.

fuel screw it your running this bitch on self satisfaction, so your gunna need the new mugen head pulse width thought enhancer to get this thing redlining..

I think thats it if I missed anything please add</TD></TR></TABLE>

LMAO!!! "You're running this bitch on self satisfaction"...cheaper than gas now a days.

 

lol he posted 60 times?!?!?! there must be a lot of cars in the junkyard because of this kid

 

I dont get what you mean lol.who cares how many posts I have lol.

how would you put a b16 on a integra. I can swap on in a DA, aswell as put a h22a in a accord.

lol there is only one car in the wreckers cause of me a 1990 oldsmobile delta 88 drove that hoe to 400,000

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegra2G &raquo;</TD></TR><TR><TD CLASS="quote">I dont get what you mean lol.who cares how many posts I have lol.

how would you put a b16 on a integra. I can swap on in a DA, aswell as put a h22a in a accord.

lol there is only one car in the wreckers cause of me a 1990 oldsmobile delta 88 drove that hoe to 400,000</TD></TR></TABLE>

I don't know man, but your earlier post made my day. I was trying really hard not to bust out laughing at work

 

yeah im pretty sure he was being EXTREMELY sarcastic, and if you guys didnt notice that then i think your the ones people should be laughing at

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sean5826 &raquo;</TD></TR><TR><TD CLASS="quote">yeah im pretty sure he was being EXTREMELY sarcastic, and if you guys didnt notice that then i think your the ones people should be laughing at </TD></TR></TABLE>

Of course he's being sarcastic....it's still funny as hell though....air cooled B16 Muawhahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Circusraven &raquo;</TD></TR><TR><TD CLASS="quote">

Of course he's being sarcastic....it's still funny as hell though....air cooled B16 Muawhahaha</TD></TR></TABLE>

yeah i got quite the kick out of it too

 

Yea, B16 will fit pretty easily. Like said above you just have to do some wire work.

 

yeah its not a hard swap, but if you wanna put it on your teg, thats gonna be a little harder, just listen to what tegra said above