lets try this again: full race car for sale
i figured id try this again
chassis:
92 civic full race car
1 piece front end
fiberglass doors
fiberglass hatch
lexan all around except hatch
6 pt roll cage
98 prelude pearl white
gunmetal roll bar
full urethane front bushings with traction bar setup
skunk2 coilover sleeves with 900lb springs in the rear
gunmetal lenso fronts with new 24" MH slicks
matching lenso skinnies in the rear
jaz 1 gallon fuel cell with full stainless steel braided lines
aeromotive fuel pump/filter
sparco seat
RCI platinum 5pt harness
DSS stage 3.9 (the new stg 5s)
tach, temp, oil pressure guages
new AEM wideband
P28 with moates ostrich
motor:
GSR block stock crank
eagle rods
wiseco pistons
B16 head ported by the best (brad at RLZ engineering)
rocket motorsports gen 2 valve springs clearanced for huge cams
rmf header made to my specs
victor X intake manifold
70mm TB
skunk 2 pro 2 series cams
3" custom intake with velocity stack and filter
MSD digital ignition with launch limiter
this is a full turn key race car. its gone 11.51@118 on high 1.6 60s. its more than capable of 11.3s. its running faster MPH than it ever has just havent been to the 1/4 mile yet.
$8000obo
car made 249 last year with minimal AF, cam gear tuning. i didnt fine tune it till the last ounce seemed kinda pointless.
spare parts:
jun 3 cams
ITR head, pretty much complete without cams
GSR tranny with bad 5th/reverse synchro
spare ITR 1-5 gearset
ITR LSD
18 foot haulmark enclosed trailer
16 open bed trailer
23 M&H slicks 250 in great condition, very few passes, 10 or so id guess pulled my best 60s ever on these
24 MT slicks, in great condition also 250
bare GSR head, can include rockers
spare sets of rockers
OBD2 GSR IM
ITR IM
JG sheetmetal IM
eagle GSR rods in excellent shape
JDM DC 4-1 header stainless steel
GSR crank, in excellent condition
ITR cold air intake AEM with filter
all sorts of other misc stuff, starters, B16IM, stock valves etc etc etc.
kens custom 10 pt cage with 50' extra feet of tubing in 5' sections 1000
bogart 15X3.5 skinnies
im taking offers for complete car and taking offers on spare parts. some things i will not sell until the entire car is gone.
PM me for more info.









Modified by 1 2 NV at 4:40 PM 9/27/2008
chassis:
92 civic full race car
1 piece front end
fiberglass doors
fiberglass hatch
lexan all around except hatch
6 pt roll cage
98 prelude pearl white
gunmetal roll bar
full urethane front bushings with traction bar setup
skunk2 coilover sleeves with 900lb springs in the rear
gunmetal lenso fronts with new 24" MH slicks
matching lenso skinnies in the rear
jaz 1 gallon fuel cell with full stainless steel braided lines
aeromotive fuel pump/filter
sparco seat
RCI platinum 5pt harness
DSS stage 3.9 (the new stg 5s)
tach, temp, oil pressure guages
new AEM wideband
P28 with moates ostrich
motor:
GSR block stock crank
eagle rods
wiseco pistons
B16 head ported by the best (brad at RLZ engineering)
rocket motorsports gen 2 valve springs clearanced for huge cams
rmf header made to my specs
victor X intake manifold
70mm TB
skunk 2 pro 2 series cams
3" custom intake with velocity stack and filter
MSD digital ignition with launch limiter
this is a full turn key race car. its gone 11.51@118 on high 1.6 60s. its more than capable of 11.3s. its running faster MPH than it ever has just havent been to the 1/4 mile yet.
$8000obo
car made 249 last year with minimal AF, cam gear tuning. i didnt fine tune it till the last ounce seemed kinda pointless.
spare parts:
jun 3 cams
ITR head, pretty much complete without cams
GSR tranny with bad 5th/reverse synchro
spare ITR 1-5 gearset
ITR LSD
18 foot haulmark enclosed trailer
16 open bed trailer
23 M&H slicks 250 in great condition, very few passes, 10 or so id guess pulled my best 60s ever on these
24 MT slicks, in great condition also 250
bare GSR head, can include rockers
spare sets of rockers
OBD2 GSR IM
ITR IM
JG sheetmetal IM
eagle GSR rods in excellent shape
JDM DC 4-1 header stainless steel
GSR crank, in excellent condition
ITR cold air intake AEM with filter
all sorts of other misc stuff, starters, B16IM, stock valves etc etc etc.
kens custom 10 pt cage with 50' extra feet of tubing in 5' sections 1000
bogart 15X3.5 skinnies
im taking offers for complete car and taking offers on spare parts. some things i will not sell until the entire car is gone.
PM me for more info.









Modified by 1 2 NV at 4:40 PM 9/27/2008






