Well, here's the story, I was tring to wire my lock actuators to a factory honda switch to make my manual locks work powered. Unfortunately, it was a a failure. Even worse i have no night driving lights now. By appliying the brakes, the lights still function, and headlights work aswell. No fuses are blown, and all bulbs are good. What should be the next thing to check? Relays? If so or not where should i start. I have been told to replace my dimmer, but im not convinced.

ALL SUGGESTIONS ACCEPTED. JUST PLEASE HELP ME.

 

dimmer = interior light only.

tail light, license lights and interior lights = blown park light fuse. (check the under dash fuse again, also check the under hood fuses)

blown lights fuse while trying to wire up locks... failure is not the word. (ouch)

 

ALL FUSES ARE GOOD ( UNDER HOOD AND DASH )

 

wow seriously i have the same exact problem. everything is good fuses and bulbs are good.

except what happened with me was i had my side markers wired to just stay on with my parking lights, and some dumbass friend of mine told me i could wire them to my parking lights and my signal by pretty much just bridging the red and green wire together, and my retarded *** believed it.

turn signals, and head lights work, but my cluster lights, license plate lights, and parking lights don't work.