wtb b20 block
Honda-Tech Member
Joined: Jul 2004
Posts: 886
Likes: 0
From: Loudoun County, VA
Re: wtb b20 block (4doorcivic16)
sometime in the next month i'll be selling a B20b block, LS intake manifold, with LS trans, with 10lb flywheel and clutch with 20k miles on them.
will do for $750.
head is milled .020" , so it's about 9.3:1 compression.
i bought the engine from an importer. i took it completely apart and put a type r oil pump, new water pump, all new gaskets.
you could still perfectly see the crosshatch on the cylinders. i've put about 20,000 miles on it in the last 3 years. i'd safely say the engine has 80k miles or less.
car passed emissions last year with all levels at 1/3 of maximum. it runs very strong.
will do for $750.
head is milled .020" , so it's about 9.3:1 compression.
i bought the engine from an importer. i took it completely apart and put a type r oil pump, new water pump, all new gaskets.
you could still perfectly see the crosshatch on the cylinders. i've put about 20,000 miles on it in the last 3 years. i'd safely say the engine has 80k miles or less.
car passed emissions last year with all levels at 1/3 of maximum. it runs very strong.
Thread
Thread Starter
Forum
Replies
Last Post