lowered car today
ill get some pics up in a little but lowered my car today on ksport coils, did about 3 inches... bitches are too low, i need to raise it when i get the chance, but o0o0o they look sexy
ok heres a few ill take some more tomorrow sorry these are all cell fone pics
Before the Drop
After The Drop

Under the Front

Comparison of stock and Ksports


Getten my SI's tomorrow so ill take more pics. enjoy
Before the Drop
After The Drop

Under the Front

Comparison of stock and Ksports


Getten my SI's tomorrow so ill take more pics. enjoy
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 »</TD></TR><TR><TD CLASS="quote">Let us know if/when the struts blow out.</TD></TR></TABLE>
x2
Doesn't seem like it looks too pretty, either.
x2
Doesn't seem like it looks too pretty, either.
haha yea i kno, after i get my SI's im gonna adjust them to a fingergap all around. question this was the first time for me installing my suspension, will it be bad for me to adjust the height with the coils still on my car? or doi HAVE to take them off and adjust. i really dont want to have to take them off
while i dont have experience with honda coilovers, i know that i can adjust the coilovers on my trans-am without removing them from the car.....jackstands (or a lift) and remove the wheel and go to work
ahaha i dont want it that low, i just wanted to see what slammed would look like with my ksports, ima raise them back up to 1/2 finger gap when i put my si's on. im not driven the car until i raise em back up.
You don't have to remove them from the car. What I do is unbolt the top of the suspension from the strut towers and spin the whole unit to adjust the height, then bolt everything back together.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">You don't have to remove them from the car. What I do is unbolt the top of the suspension from the strut towers and spin the whole unit to adjust the height, then bolt everything back together.</TD></TR></TABLE>
You don't have to unbolt the upper perch, because it has two collars. Just jack the car up, and while the suspension is hanging, rotate the collars to raise the lower perch of the springs.
You don't have to unbolt the upper perch, because it has two collars. Just jack the car up, and while the suspension is hanging, rotate the collars to raise the lower perch of the springs.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 203_EM2 »</TD></TR><TR><TD CLASS="quote">leave it like that!!! </TD></TR></TABLE>
HAHA pot holes wholes, and speed bumps would rape me if i did. plus id like to keep my shocks in good condition =] whole reason i purchased these. lowering them was just a nice bonus.
HAHA pot holes wholes, and speed bumps would rape me if i did. plus id like to keep my shocks in good condition =] whole reason i purchased these. lowering them was just a nice bonus.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 »</TD></TR><TR><TD CLASS="quote">
You don't have to unbolt the upper perch, because it has two collars. Just jack the car up, and while the suspension is hanging, rotate the collars to raise the lower perch of the springs.</TD></TR></TABLE>
I was only speaking from my Prelude experience. No MacPherson stuff on ours
You don't have to unbolt the upper perch, because it has two collars. Just jack the car up, and while the suspension is hanging, rotate the collars to raise the lower perch of the springs.</TD></TR></TABLE>
I was only speaking from my Prelude experience. No MacPherson stuff on ours
ok sorry taken so long for updates, ill be getten the si's tomorrow. so ill wash my car and take finished pics.
yes i realize its diff in the front and the back after i put the si's on tomorrow ill adjust the height while the tires are off. also i kno my car is dirty getten washed when its all over. ps. i hate my mirrors stock ssm's are comen soon!

it hurts me to see it so dirty

From the ground

Front End
yes i realize its diff in the front and the back after i put the si's on tomorrow ill adjust the height while the tires are off. also i kno my car is dirty getten washed when its all over. ps. i hate my mirrors stock ssm's are comen soon!

it hurts me to see it so dirty

From the ground

Front End
Thread
Thread Starter
Forum
Replies
Last Post




