so i have had the apexi neo installed for quite some time now but i have just gotten around to wiring in the VTEC to it. but im not quite sure if i did the wiring right. i disrupted the wire that goes to the positive of the bottom of the VTEC solenoid. im not sure if my car has the VTM signal, i ran my own wiring for it becuase i have a cx harness so my wire colors are diff from stock.
also if i get the wiring right then how do i use the VTEC match and unmatch to get the air/fuel ratio right? im lost and the instruction manual is about as clear as mud.