The help me get a pain job or my car tune Sale.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: May 2006
Posts: 466
Likes: 0
From: Lebanon, PA, USA
For those of you who don't know my "Project Civic" was involve in BBQ accident where the main dish was my civic!!
:sad:
Anyway I figure since I still have some stuff for sale plus some other stuff that do to the sircuntances I might as well sell them to help me either get it painted, via maaco or have my car tune.
Some of the parts are new never being used so I hope I can get as much as possible for them, other are use so Im willing to be as negotible as possible.
Some of the stuff I don't have pictures, some of the stuff might have a funny smell to if because of the fire but I can assure that are in great working condition.
I will really like to make this stuff pick up only, but I know theres probably a lot of you who are willing to paid for shipping + paypal fees so I guess I have to be flexible, that being said hope you guys can be flexible with me as well since It might take me some time to pack the stuff and ship it.
Also you might have some stuff that I might need for my project so let me know what you have.
First of all the new stuff.
Ok keep in mind that this is to be used on a carbulator set up I belived perfect as a gift for someone building a hot rod. You will get one of each, Aeromotive 13201 ($81.95) and Summit Racing 1.5" liquid fill fpr 15 psi ($16.95) Also included are the fittings (about $10) which I got seperate but will be included with the deal for a total of $109.
How about $75 for everything shipped

Next is the Turbonetics Godzilla BOV
Paid $300 for it, - Minus the silicone hose, took it out of the box now I can't find it.
Shoot me an offer and it is yours.

Next are a set of special order Wiseco "Ventura Racing spec" Paid nearly $700 for this pistons. They are for the 2.4 Nissan engine KA24E SOHC. This engine is found on the Nissan 240sx car but belived this engine came in other behicles. This piston were order for a Nitrous set up engine that I was building that was going on my 73 Datsun Drag car that I sold.
This piston I belived are either 40 or 60 over so block will need to be bore out. Also this pistons are specially made to be use with the Carrillo Connecting rods.
I have no used for this pistons so any reasonalbe offer will not be refuse. Brand new in box with everything including rings.
a friend of mine ran 9's in the 1/4 mile with his Nitros set up using the same pistons I have for sale.

Next is a Painless Performance Remote Starter Solenoids ($34.88)
$27 shipped takes it.

Next is Summit Racing remote battery jumper terminals.
$15 shipped.

Modified by Boricuanology at 12:49 AM 6/10/2008
:sad:Anyway I figure since I still have some stuff for sale plus some other stuff that do to the sircuntances I might as well sell them to help me either get it painted, via maaco or have my car tune.
Some of the parts are new never being used so I hope I can get as much as possible for them, other are use so Im willing to be as negotible as possible.
Some of the stuff I don't have pictures, some of the stuff might have a funny smell to if because of the fire but I can assure that are in great working condition.
I will really like to make this stuff pick up only, but I know theres probably a lot of you who are willing to paid for shipping + paypal fees so I guess I have to be flexible, that being said hope you guys can be flexible with me as well since It might take me some time to pack the stuff and ship it.
Also you might have some stuff that I might need for my project so let me know what you have.
First of all the new stuff.
Ok keep in mind that this is to be used on a carbulator set up I belived perfect as a gift for someone building a hot rod. You will get one of each, Aeromotive 13201 ($81.95) and Summit Racing 1.5" liquid fill fpr 15 psi ($16.95) Also included are the fittings (about $10) which I got seperate but will be included with the deal for a total of $109.
How about $75 for everything shipped

Next is the Turbonetics Godzilla BOV
Paid $300 for it, - Minus the silicone hose, took it out of the box now I can't find it.
Shoot me an offer and it is yours.

Next are a set of special order Wiseco "Ventura Racing spec" Paid nearly $700 for this pistons. They are for the 2.4 Nissan engine KA24E SOHC. This engine is found on the Nissan 240sx car but belived this engine came in other behicles. This piston were order for a Nitrous set up engine that I was building that was going on my 73 Datsun Drag car that I sold.
This piston I belived are either 40 or 60 over so block will need to be bore out. Also this pistons are specially made to be use with the Carrillo Connecting rods.
I have no used for this pistons so any reasonalbe offer will not be refuse. Brand new in box with everything including rings.
a friend of mine ran 9's in the 1/4 mile with his Nitros set up using the same pistons I have for sale.

Next is a Painless Performance Remote Starter Solenoids ($34.88)
$27 shipped takes it.

Next is Summit Racing remote battery jumper terminals.
$15 shipped.

Modified by Boricuanology at 12:49 AM 6/10/2008
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: May 2006
Posts: 466
Likes: 0
From: Lebanon, PA, USA
Now the used stuff!
Had this very nice and organized with all the info so I will try to do it all over again!
Next is my trailer, every time Im about to or im selling it something good/bad happen and the trailer always comes to the rescue!!
Starlite 6.5 x 12 paid $1000, but will like $600 for it.
Things I did to it
New floor
4 Brakets on each conner
The good thing about the trailer is that is light, use to pull this trailer with my astro van and it felt like I was pulling nothing, also because is so light it is a lot easy to move. Used to move it by my self with my rolling chassin on top. Also it has only one axel so it saves on the Toll.
As you can see it will save you on gas because its light and also at the toll.
Did carried my 93 SI from Maryland on this baby but It would be better if you can modified the ramp even more. I had it cut in the middle to let the wheelie bar and chute out from my previos drag project but was thinking about removing the whole ramp and just put them on the sides of the trailer but never got to do it besides left it that way in case it will be use for something else.
Bad things about it!
(1) one of the tail lights are broken on the side, kids at the the church where trailer was parked broke it.
(2) depending on the wiring that you have, you might need to use a diffrent connector.
(3) thing that you turn to make the trailer go higher or lower is bend because my brother move the trailer without checking to see that the trailer was actually high.
This part was bended but works perfect, never botter to fix it since it works anyway.
All this stuff can be easily fix with a trip to any Tractor supply store.
Will include my 4 HD straps and also my trailer lock with key ($100+) free to compensate for this flaws.
Have tittle for it and this is a come and pick it up unless you paid for my expense to deliver it to you.

Being that I am at the attic and it feels like 100 + degrees and being that I already don't feel like writing everything all over after I delete by accident here the fallowing are the parts I have open for the best offer, some I can ship some I will rather have you come here or might be able to take to you meet you half way AS LONG AS YOU PAID FOR MY EXPENSESS, don't know if you realized but Gas price went up, LOL.
both of this parts are milano red and came out of my 93 SI


Its hot out there put a/c on you car with this, Only thing missing is the compessor/braket.

besides the pedals I also have the shift linkage

Bedliner with opening for the sunroof

Modified by Boricuanology at 12:54 AM 6/10/2008
Had this very nice and organized with all the info so I will try to do it all over again!
Next is my trailer, every time Im about to or im selling it something good/bad happen and the trailer always comes to the rescue!!
Starlite 6.5 x 12 paid $1000, but will like $600 for it.
Things I did to it
New floor
4 Brakets on each conner
The good thing about the trailer is that is light, use to pull this trailer with my astro van and it felt like I was pulling nothing, also because is so light it is a lot easy to move. Used to move it by my self with my rolling chassin on top. Also it has only one axel so it saves on the Toll.
As you can see it will save you on gas because its light and also at the toll.
Did carried my 93 SI from Maryland on this baby but It would be better if you can modified the ramp even more. I had it cut in the middle to let the wheelie bar and chute out from my previos drag project but was thinking about removing the whole ramp and just put them on the sides of the trailer but never got to do it besides left it that way in case it will be use for something else.
Bad things about it!
(1) one of the tail lights are broken on the side, kids at the the church where trailer was parked broke it.
(2) depending on the wiring that you have, you might need to use a diffrent connector.
(3) thing that you turn to make the trailer go higher or lower is bend because my brother move the trailer without checking to see that the trailer was actually high.
This part was bended but works perfect, never botter to fix it since it works anyway.
All this stuff can be easily fix with a trip to any Tractor supply store.
Will include my 4 HD straps and also my trailer lock with key ($100+) free to compensate for this flaws.
Have tittle for it and this is a come and pick it up unless you paid for my expense to deliver it to you.

Being that I am at the attic and it feels like 100 + degrees and being that I already don't feel like writing everything all over after I delete by accident here the fallowing are the parts I have open for the best offer, some I can ship some I will rather have you come here or might be able to take to you meet you half way AS LONG AS YOU PAID FOR MY EXPENSESS, don't know if you realized but Gas price went up, LOL.
both of this parts are milano red and came out of my 93 SI


Its hot out there put a/c on you car with this, Only thing missing is the compessor/braket.

besides the pedals I also have the shift linkage

Bedliner with opening for the sunroof

Modified by Boricuanology at 12:54 AM 6/10/2008
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: May 2006
Posts: 466
Likes: 0
From: Lebanon, PA, USA
This is a rare to find items, they are from my '73 Datsun 1200. I have all the glass from my Deluxe '73 Datsun 1200.
I have seen people paid up to $400 for only one of this glass, I'm letting them go for $500, this includes all 8 of them. If sold for this amount I have a bunch of other stuff that I will included on the deal. all of them for the 73 Datsun Deluxe 1200.



Missing the pictures of all my glass, but can assure that that they are in new condition.
Sadly some of this stuff got burn out but manage to save some stuff, I have rear bumper, needs some work but is still pretty good. some of the lights got burn out as well did manage to save a few others might need a bit of cleaning. the grill might need some cleaning as well but it is still good.
I have seen people paid up to $400 for only one of this glass, I'm letting them go for $500, this includes all 8 of them. If sold for this amount I have a bunch of other stuff that I will included on the deal. all of them for the 73 Datsun Deluxe 1200.



Missing the pictures of all my glass, but can assure that that they are in new condition.
Sadly some of this stuff got burn out but manage to save some stuff, I have rear bumper, needs some work but is still pretty good. some of the lights got burn out as well did manage to save a few others might need a bit of cleaning. the grill might need some cleaning as well but it is still good.
Thread
Thread Starter
Forum
Replies
Last Post
Stock@$$GSR
For Sale
18
Dec 25, 2008 05:33 PM



