Hey guys I am replacing a bunch of parts on my car and am looking for some advice and opinions.

It is a 91 CRX Si with a b16a. 325whp 220 ft-lb torque.

I am replacing a bunch of things and they all have to change at once. Currently has Hasport mounts and a cable S1 tranny and is driveable with all working parts. I am getting a hydro tranny from a 99 civic si. The hydro tranny needs new mounts so I ordered Innovative mounts for my car with a hydro tranny. So here are my questions.

The hydro tranny takes different axles then cable correct? What axles would you recomend? How do I know what size/spline/whatever. Is 91 CRX Si with a b16a hydro tranny enough info? I dont know what halfshaft is in there now or if there are different types sizes.

Also what clutch would you recomend for this power level since i am getting a new tranny and need one anyway.

Thanks

 

As far as the clutch goes, decide if you want more power in the future. Many people run the Comp twin-disk. May not be necassary unless you want more power in te future. If you're just stick at around 350 hp then you have a lot of options.

And for the axles. http://www.driveshaftshop.com/HONDAPAGE.ivnu
I'm sure if you had any questions, they will help you out. O and the DSS axles are sick. I'll stand by their axles any day! good luck man.

 

anyone know if the halfshaft is the same or different?