i am located south of houston texas. will ship to anywhere buyer pays expense.. costs about 150 to ship everything (downpipe is long)

complete dsm home made turbo kit not compatable with a/c or p/s (trust me it is not bad)
includes: 14b turbo mounted on and welded toa a"hf" manifold. (minimal shaft play)
all piping and couplers for an eg
intercooler
GReddy type s BOV
GReddy Profec B boost controller(brand new) 300 bucks alone
motorola 2.5 bar map sensor
custom made downpipe with wideband bung already welded in
custom made intake for turbo.
dsm 450 injectors w/ injector clips
all bolts
one bolt broke off where the turbo and downpipe went together. just drill and tap it it will be all good.
oil feed and drain lines

all you need is a fitting to weld to the oil pan for oil return
an oil filter sandwhich plate for oil feed (or you can use t fitting on oil pressure sender)
and a resistor box

my phone number is 979-417-6066 call or text me. it will be faster response than pming me here.

asking 900 bucks with the profec and 650 without plus shipping. accepting most resonable offers if it is sold quick

 

pictures:

 

 

most people bitched about the intercooler being so small... it kept my iat's at around 105. it cools very well. had this setup on a jdm d15b with a comp cams 59300 cam and it made 308 on 22 psi. and then my rods ***-raped my cylinder

 

ttt

 

ttt