There will be a Pre Meet in Vancouver for the June 14th Honda-Tech Meet in Beaverton.
Anyone is welcome, we will all roll out there together.

Location is 360 Imports, on Hwy 99 and 86th St.
http://maps.google.com/maps?ie...=addr
Meet there in between 12:15 and 12:30
Plan is to leave around 12:45 to 1:00 but that depends on when the tacoma cars show up.

THE LIST
1. turnsignalandy
2.jime64871
3.BinMop????
4.djmaxi1
5.dc2vu
6.Royal_C!ty
7.iveeno
8.Panda Eg6
9.preludedriva
10.Hiii Im TYLER???
11.
12.
13.

anyone else??

Anyone participating should have common sense and not do anything stupid at the pre meet or on the way there. No racing, no excessive revving, no burnouts please


Modified by turnsignalandy at 6:27 PM 6/2/2008


Modified by turnsignalandy at 7:21 PM 6/2/2008


Modified by turnsignalandy at 4:19 PM 6/6/2008


Modified by turnsignalandy at 4:20 PM 6/6/2008

 

YaY for pre-meet's!!!

 

Im dwn!

 

my shop is right off I-5....can meet there if people don't wnat to head east ....I'm never in East Van

 

that works too cause its right next to the free way. Where exactly is yoir shop?

 

maybe us tacoma kids cruising together can meet up with you cool southerners and do a massive washington roll out?!?

 

[freak] YA!!!

Yall are welcome too, itd be rad!!! We just gota figure out a location, but Evs-one shop sounds like a good idea, if theres enough room for all of us.

 

been there, i highly doubt it! Although it's a good idea and business

 

well theres 14 peeps on the list that are coming from seattle, and probably like 15 of us. So ya 30 cars give or take. If not we could always meet at the hooters.

 

you got 15 days to decide...

 

I was about to suggest meeting here at RRev, but I just remembered that the boat shops have all of their boats out on display in our front parking lot...So nevermind....

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jime64871 &raquo;</TD></TR><TR><TD CLASS="quote">you got 15 days to decide...</TD></TR></TABLE>

I have 15 days to put my EM1 together ....

 

what time are you guys planning to meet?

 

BUMP 4 Answers

 

I could fit 30-40 cars parked nicely in my lot...and unlimited on the street along the freeway sound barrier... Otherwise, I'm down for wherever...just not East

http://maps.google.com/maps?ie...=addr

 

That location sounds good to me. Lets make it official then. Whats the exact name of your shop?

Also what time should we meet?

 

alright so rrev motors is the location... us up north kids are leaving tacoma around 10 sooo if you guys wanna plan a time to meet around that? maybe will say we leave vancouver around 1 or so? any input is appreciated!

 

no not at RREV...I thought we are meeting at 360 imports?

 

not familar with the south shops soooo south kids were are you guys meeting?

RRev or 360?

 

Meet at 360, as in the link above. Mapquest it and see how long it takes for you guys to get there and then we will set the meet time to that.

 

http://www.mapquest.com/maps/4...98665/

Tacoma to Vancouver.

Estimated Time: 2.0 hours 2 minutes
Estimated Distance: 127.33 miles

 

^^^

welp looks like us northerner's are on top of things

 

we'll probably leave @ NOON
The drive from vancouver to beaverton isn't much.
I think this would be best....

 

If my math is right, and I know that it is, we wouldn't be pulling up to "360" until 12:30PM at the earliest. Perhaps you guys should wait up for us before heading out.

 

i'm sure we can work out a time frame where you guys could meet us here on time. What time do you guys plan on leaving? Maybe a little bit earlier to allow "what if" situations....

 

we are leaving KK at 10:30 so plus 2 hours gets us around 12:30 WITHOUT traffic.