Need help. Placing Mainshaft&Countersaft from TYPE-S into my tranny (non ATTS)
Thread Starter
Joined: Jan 2008
Posts: 1
Likes: 0
From: Moscow, Russia
Need help. Placing Mainshaft&Countersaft from TYPE-S into my tranny (non ATTS)
My prelude is BB8. I swapped an old EUM M2J4 tranny into it instead of AT.
The tranny is M2J4 - 3.285 - 1.807 - 1.266 - 0.966 - 0.787 - 4.266
it's from 4G prelude 2.0 You can see the gears. This tranny now has dead synchros. absolutely dead. New synchros cost alot, so i want to swap the full "interior" of the M2U4 - 3.285 - 1.956 - 1.344 - 1.034 - 0.812 - 4.266 tranny into mine tranny case. The M2U4 tranny is a Type-S tranny the same as SH preludes have. it's mileage is realy low. the numbers are a bit another, but the main gear is the same. so the Differential with the main gear will fit.
Is that swap possible or not? why?
PS sorry for my english(
The tranny is M2J4 - 3.285 - 1.807 - 1.266 - 0.966 - 0.787 - 4.266
it's from 4G prelude 2.0 You can see the gears. This tranny now has dead synchros. absolutely dead. New synchros cost alot, so i want to swap the full "interior" of the M2U4 - 3.285 - 1.956 - 1.344 - 1.034 - 0.812 - 4.266 tranny into mine tranny case. The M2U4 tranny is a Type-S tranny the same as SH preludes have. it's mileage is realy low. the numbers are a bit another, but the main gear is the same. so the Differential with the main gear will fit.
Is that swap possible or not? why?
PS sorry for my english(
