This is for B series motors. All you would need is a high flow fuel pump, oil lines, water lines, a good tune and a reststor box or 10watt 10ohm resistors for the injectors.

I WILL NOT SHIP! Im located in lower New York. I will meet up at a reasonable distance.

Im asking $650 obo
Or
Trade for a cable y1 tranny with no grinds.

Or
hydro b16/gsr tranny w/ cable conversion kit.


I WILL NOT PART ANYTHING OUT! IF YOU ASK I WILL NOT RESPOND!



Heres whats included..



DSM 450cc peak and hold injectors (tested and rebuilt) very minty!
Ebay Bov
Ebay FPR
Ebay waste gate
1/8 npt oil tee set up for -4an feed
Guage pod
Auto meter Boost guage and new nylon line kit
Auto meter AFR guage



Ebay intercooler / 2.5" tubing kit



Garrett TB0356 oil/water cooled turbo. comp. A/r 42 turbine A/r 48

Was modified for an external waste gate and also to fit the Mitsu. Evo down pipe that is modded to fit into a 92 teg.






Look like a ssac manifold, was modified for and external waste gate.
Also looks like a few cracks were repaired.




-Eric


Modified by Alpinestar03 at 12:05 PM 6/26/2008


Modified by Alpinestar03 at 2:55 AM 6/28/2008


Modified by Alpinestar03 at 2:56 AM 6/28/2008


Modified by Alpinestar03 at 10:16 PM 7/1/2008


Modified by Alpinestar03 at 12:35 AM 7/2/2008

 

bumpp

 

Pm'd you

 

buump

 

bump

 

buump

 

bump

 

bump it

 

buumpp

 

bummp

 

bumppp

 

buumpp

 

BUUMP