FS: B18A1 USDM ITR P73 Pistons GSR Crank, Flywheel, ETC Glendale 818 AREA
Thread Starter
Honda-Tech Member
Joined: May 2005
Posts: 737
Likes: 0
FS: B18A1 USDM ITR P73 Pistons GSR Crank, Flywheel, ETC Glendale 818 AREA
B18A1 81.25mm Bore & Hone from United Machine Shop
3 Angle Valve Job <All internals in head are either brand new or micro polished>
USDM -2 ITR Pistons <Brand New>
LS Rods <Used, but micropolished>
GSR Crank <Used, but micropolished>
GSR Flywheel <Lightened and shaved>
OEM Honda Copper Headgasket
OEM Honda oil pan gasket
LS Oil, water pumps
Will include NEW thermostat, timing belt, and alternator belt
Block, Head, and Valve Cover have been professionally sprayed with heat resistant paint.
Compression: 11.39
Motor is brand new and has never been used
Invested about $1500
Motor was originally going in the hatch that I sold. I need the cash for books and tuition, need to sell ASAP
$1000 Firm
<Manifold, tranny, and NGK wires are not included>
3 Angle Valve Job <All internals in head are either brand new or micro polished>
USDM -2 ITR Pistons <Brand New>
LS Rods <Used, but micropolished>
GSR Crank <Used, but micropolished>
GSR Flywheel <Lightened and shaved>
OEM Honda Copper Headgasket
OEM Honda oil pan gasket
LS Oil, water pumps
Will include NEW thermostat, timing belt, and alternator belt
Block, Head, and Valve Cover have been professionally sprayed with heat resistant paint.
Compression: 11.39
Motor is brand new and has never been used
Invested about $1500
Motor was originally going in the hatch that I sold. I need the cash for books and tuition, need to sell ASAP
$1000 Firm
<Manifold, tranny, and NGK wires are not included>
Thread
Thread Starter
Forum
Replies
Last Post
green eyed bandit
All Motor / Naturally Aspirated
7
Aug 5, 2007 07:44 PM
