I have a 99 dc4 tan interior. Today I was swabbing out the tan dashboard for black dash from a 94-97 dc4 integra. Just as I started to bolt down the dashboard, I started to plug in all the wires back in. I started to plug in the fuse box plugs and realized that 3 out of 4 plugs dont fit my fuse box...

What should I do here? Hard wire the 99 wire harness into the 94-97 dash and cut out the 94-97 wire harness? Is there a diagram of the wires and harness? I would really hate to tear everything back out.

 

the harness are different. what you should of done was reuse the harness from the tan dash.

 

Yea, I didn't realize they were different until it was actually in and trying to plug in the plugs. Luckily the gf came around just as I began to pull it out again to replace the harness so she helped me pull out the dash. Made things a hell of a lot easier with 2 people.

But shes all rewired up and working.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by silentdeath12886 &raquo;</TD></TR><TR><TD CLASS="quote">Yea, I didn't realize they were different until it was actually in and trying to plug in the plugs. Luckily the gf came around just as I began to pull it out again to replace the harness so she helped me pull out the dash. Made things a hell of a lot easier with 2 people.

But shes all rewired up and working.</TD></TR></TABLE>