Built LS/Vtec Turbo Motor FULL SWAP TRADE for bike OR $5k
ON EBAY!!!! http://cgi.ebay.com/ebaymotors...69785
This is a Turbo LS/Vtec motor set up. It currently has about 1000 miles on it. It is fully broken in at this stage and due to a new born i am unable to continue to keep my car. I have a total of about $10k wrappd up into this setup including entire turbo setup. I am asking $5k or some sort of trade for a bike preferably a 600 Honda. Please email me with any questions at all. I have ran 129mph trap speeds at 11.6 quarter mile. It is capable of much faster runs withsome slicks. Heres some pics and a list of the mods.









<U>Engine + Performance </U>
-L/S V-tec Conversion
-Hondata Tuned Fuel Management System
-B18b1 Block
-B18c1 Head
-Cometic Head Gasket
-ARP Head Studs
-ARP Rod Bolts
-SRP Pistons
-Eagle Rods
-ACT Extreme CLutch and Pressure Plate
-Refinished flywheel
-Decked Head and Block
-Custom Equal Length Turbo Manifold
-T3/T4 Turbo 60 Trm .63 A/R
-HUUUUGe front mount
-Blitz Blow off valve
-2.5"-3" Downpipe Heat Wrapped
-38mm Tial Wastegate
-RC 750cc Injectors
-B+M Fuel Press. Gauge and Fuel Press. Regulator
-Custom PCV OIL Breather System
-Motor Mount inserts SOLID
Modified by streetlvlhatch at 1:39 PM 5/18/2008
This is a Turbo LS/Vtec motor set up. It currently has about 1000 miles on it. It is fully broken in at this stage and due to a new born i am unable to continue to keep my car. I have a total of about $10k wrappd up into this setup including entire turbo setup. I am asking $5k or some sort of trade for a bike preferably a 600 Honda. Please email me with any questions at all. I have ran 129mph trap speeds at 11.6 quarter mile. It is capable of much faster runs withsome slicks. Heres some pics and a list of the mods.









<U>Engine + Performance </U>
-L/S V-tec Conversion
-Hondata Tuned Fuel Management System
-B18b1 Block
-B18c1 Head
-Cometic Head Gasket
-ARP Head Studs
-ARP Rod Bolts
-SRP Pistons
-Eagle Rods
-ACT Extreme CLutch and Pressure Plate
-Refinished flywheel
-Decked Head and Block
-Custom Equal Length Turbo Manifold
-T3/T4 Turbo 60 Trm .63 A/R
-HUUUUGe front mount
-Blitz Blow off valve
-2.5"-3" Downpipe Heat Wrapped
-38mm Tial Wastegate
-RC 750cc Injectors
-B+M Fuel Press. Gauge and Fuel Press. Regulator
-Custom PCV OIL Breather System
-Motor Mount inserts SOLID
Modified by streetlvlhatch at 1:39 PM 5/18/2008
Thread
Thread Starter
Forum
Replies
Last Post
hondacrx2
Mid-Atlantic (Sales)
3
Mar 19, 2011 10:08 PM
hypeRhatch
Classifieds: Forced Induction
11
Dec 10, 2007 09:50 PM



