5th Gen Prelude Parts (go fast parts)
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 323
Likes: 0
5th Gen Prelude Parts (go fast parts)
Come buy my parts before I'm tempted to keep the prelude and re-modify it. As with most things posted in local forums i would prefer a local sale, but am willing to ship.
Onto the parts:
Tanabe Ultra Medallion Exhaust.....$375
This is the lightweight Tanabe exhaust with thin tubes and a titanium muffler. It weighs 17 pounds according to my scale, which is 15.5 lighter than the stock exhaust (37 pounds on my scale). This exhaust is loud, but a silencer is included (I DD with this exhaust for ~1.5 years). Also, the muffler's sound deadening material slides within the muffler when rocked by hand; I don't know what this means about the muffler's condition, but wanted to mention it.
Vibrant Header (base model).....$SOLD
Iceman Intake (no bracket, extra used filter).....$115
This is a plastic two piece intake which can be used as either a SRI or a CAI. As a CAI it does not required cutting the inner fender to route it to the inner fender-well (as the AEM CAI does). The plastic material is also less thermally conductive than aluminum, as used in other CAIs, to keep the intake air charge temperature low and the engine's efficiency up. This piece was originally white, and I painted it black using a plastic spray paint. There are some areas where the intake rubbed through the black paint (as I have no mounting bracket). Also, the intake has two nitrous holes drilled into the SRI section (I covered them with duct tape).
Rota Slipstreams (16x7, 5x114.3).....$SOLD
Kosei K1s (16x7.5 +43, 5x114.3 & 1/3 used RT-615 Azenis).....$550
Link to seperate for sale thread.
These come with partially used RT-615 Azenis (~6/32 remaining, will take a more accurate measurement later), but no center caps.
Type SH Rear Tray or Base Tray w/Interior 3rd Light.....$60
Somewhat self-explanatory, to either convert your wingless prelude to a winged model without the interior brake light, or a to convert a winged model to a wingless one with the interior light.
New PBR/Axxiss Ultimate Front pads....$50
Brand new. I used a set with the prelude and really enjoyed them.
Here are some pictures of the parts, and the car: (some parts pictured were already sold)
Modified by ludiferino at 12:26 AM 11/2/2008
Onto the parts:
Tanabe Ultra Medallion Exhaust.....$375
This is the lightweight Tanabe exhaust with thin tubes and a titanium muffler. It weighs 17 pounds according to my scale, which is 15.5 lighter than the stock exhaust (37 pounds on my scale). This exhaust is loud, but a silencer is included (I DD with this exhaust for ~1.5 years). Also, the muffler's sound deadening material slides within the muffler when rocked by hand; I don't know what this means about the muffler's condition, but wanted to mention it.
Vibrant Header (base model).....$SOLD
Iceman Intake (no bracket, extra used filter).....$115
This is a plastic two piece intake which can be used as either a SRI or a CAI. As a CAI it does not required cutting the inner fender to route it to the inner fender-well (as the AEM CAI does). The plastic material is also less thermally conductive than aluminum, as used in other CAIs, to keep the intake air charge temperature low and the engine's efficiency up. This piece was originally white, and I painted it black using a plastic spray paint. There are some areas where the intake rubbed through the black paint (as I have no mounting bracket). Also, the intake has two nitrous holes drilled into the SRI section (I covered them with duct tape).
Rota Slipstreams (16x7, 5x114.3).....$SOLD
Kosei K1s (16x7.5 +43, 5x114.3 & 1/3 used RT-615 Azenis).....$550
Link to seperate for sale thread.
These come with partially used RT-615 Azenis (~6/32 remaining, will take a more accurate measurement later), but no center caps.
Type SH Rear Tray or Base Tray w/Interior 3rd Light.....$60
Somewhat self-explanatory, to either convert your wingless prelude to a winged model without the interior brake light, or a to convert a winged model to a wingless one with the interior light.
New PBR/Axxiss Ultimate Front pads....$50
Brand new. I used a set with the prelude and really enjoyed them.
Here are some pictures of the parts, and the car: (some parts pictured were already sold)
Modified by ludiferino at 12:26 AM 11/2/2008
Trending Topics
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 323
Likes: 0
Re: 5th Gen Prelude Parts (sobeman81)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sobeman81 »</TD></TR><TR><TD CLASS="quote">free bump for you. Clean Car...Clean Parts. Someone buy this man's stuff.
I'm loving the look of the front end with the yellow fogs.
</TD></TR></TABLE>
Thanks.
The header is sold.
Modified by ludiferino at 12:44 PM 5/17/2008
I'm loving the look of the front end with the yellow fogs.
</TD></TR></TABLE>Thanks.
The header is sold.
Modified by ludiferino at 12:44 PM 5/17/2008
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 323
Likes: 0
Re: 5th Gen Prelude Parts (ja20_eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ja20_eg »</TD></TR><TR><TD CLASS="quote">how much u want for the shell....if u still got it...pm back</TD></TR></TABLE>
I'm parting-out the aftermarket parts to sell the vehicle as stock. Therefore, no shell; sorry.
I'm parting-out the aftermarket parts to sell the vehicle as stock. Therefore, no shell; sorry.
Thread
Thread Starter
Forum
Replies
Last Post
