2001 Sentra SE, whats that?
dont see to many sentra's on here, so i thought i'd share some pix of mine with you all. (updated pix)


















still not quite where i want it, but close enough . . . appearance wise. let me know what you think so far.
thanx for looking
Modified by Ricer_X_01 at 5:52 AM 6/2/2008


















still not quite where i want it, but close enough . . . appearance wise. let me know what you think so far.
thanx for looking
Modified by Ricer_X_01 at 5:52 AM 6/2/2008
Trending Topics
thanx guys
as for the lip, its a mustang mach 1 lip made to fit.
the motor, just full bolt ons and cams . . . and a simple t25 setup about ready to throw on.
and the wheels, yeah they're a bit old school. i wanted them when i purchased the car new in 2001, but i couldnt find them in my bolt pattern. i found these on ebay last summer brand new for a steal. so i couldnt pass them up.
oh and the drop, i havent actually measured it, but its lowered around 4 inches plus
Modified by Ricer_X_01 at 8:57 PM 5/14/2008
as for the lip, its a mustang mach 1 lip made to fit.
the motor, just full bolt ons and cams . . . and a simple t25 setup about ready to throw on.
and the wheels, yeah they're a bit old school. i wanted them when i purchased the car new in 2001, but i couldnt find them in my bolt pattern. i found these on ebay last summer brand new for a steal. so i couldnt pass them up.
oh and the drop, i havent actually measured it, but its lowered around 4 inches plus
Modified by Ricer_X_01 at 8:57 PM 5/14/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LongJon »</TD></TR><TR><TD CLASS="quote">what kind of exhaust are you going to be using? i have a bluebird bov let me knwo if you need it.</TD></TR></TABLE>
im just gonna stick with my hks super dragger for the time being. its on the small side at 60mm, but im prolly gonna run a cut out/test pipe for when i wanna turn the boost up. not sure what im gonna do about a bov yet though. so ill have to get back to you.
and thanx again for the comments everyone
im just gonna stick with my hks super dragger for the time being. its on the small side at 60mm, but im prolly gonna run a cut out/test pipe for when i wanna turn the boost up. not sure what im gonna do about a bov yet though. so ill have to get back to you.
and thanx again for the comments everyone
yeah i always wanted to get the 04-06 red tails, but they have a overhang with my bumper and i really dont care for the newer rear bumper. so im not really sure what to do.
and again, thanx for the compliments guys
and again, thanx for the compliments guys
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type_RS_59 »</TD></TR><TR><TD CLASS="quote">BTW, what size are the wheels and tires if you don't mind me asking?</TD></TR></TABLE>
they're 18x7.5 40mm offset, with 215-40-18's. these are my 7th set of wheels on the car and the third set of 18's. i usually run 225-40-18, but when i just installed a set of JIC's i decided to drop it more, so i went with a slightly smaller tire.
they're 18x7.5 40mm offset, with 215-40-18's. these are my 7th set of wheels on the car and the third set of 18's. i usually run 225-40-18, but when i just installed a set of JIC's i decided to drop it more, so i went with a slightly smaller tire.


