Its a long story so I wont get into it now but Im parting out my 1995 240 with a blacktop S13 SR20. Everything is still installed on the car and I will be disassembling it this weekend as much as possible. The full swap was purchased from raceup.com a few years ago and it was in great shape, I have never fired it up since I got it though. Heres some of the basics:

The shell and motor swap are sold, along with the ECU, clutch, harness and some other stuff

I was gonna keep the turbo to use on my truck but it turns out its too small for a 6.0L, I figured out what kind it is though- Its a Precision SC61 52RE, theres one on ebay right now for over $1100. This one is brand new, its just been installed on the car for over 1.5yrs so it looks old. The specs are .60ar compressor housing with a 3" inlet, .63 exhaust with a T3 flange, and a 5-bolt DP flange. I think its good for over 600hp. No shaft play at all and it spins good. Since its worth over $1000 new Ill sell it for $750


Top mount manifold with T3 flange, its not an SSautochrome or OBX cheap one, I got it from someone who made it custom and the welds look good and strong, its got a high temp black coating too. $450 obo SOLD

Knockoff Greddy intake manifold- $100

set of 4 deatchworks (spelling??- got em on ebay) 720 or 740cc injectors, I dont remember Ill have to find the paperwork. They work with the stock SR20 fuel rail which I will include so I dont have to remove em from it- $250 obo

FMIC with all aluminum TIG welded intercooler piping, with flange welded in for TurboXS RFL BOV- $250 obo (or $300 with BOV)

300zx MAFS- $75

Tein front coilovers, I dont remember which exact model though- $200 obo (I dont know how much they're worth but I think thats what I paid for em)




JDM S14 front bumper with amber turn signal lights and all mounting brakets and stuff, and with the plastic covers for the holes next to the middle opening- $100 pick up only

JDM S14 trunk lid with LED spoiler- $50 pick up only

Koyo radiator, with upper opening on drivers side I have the upper rad hose though for SR20, and Ill include the 2 e-fans mounted on it- $300 obo

High capacity aluminum oil pan (ebay) $75 obo

3" stainless downpipe with 5-bolt flange for turbo with slashcut tube welded in for crankcase evac hose-- $175 oboSOLD

Ill take $30 for the aluminum master cylinder heat shield I madeSOLD

The blue thing next to the intake manifold is an adjustable FPR with pressure gauge- $75 obo

Manual boost controller, the kind with the **** on top- $25 shipped

The gauges in the console are boost, oil pressure, afr, and water temp. $175 for just the guages and all the wires, plastic tubing for the boost and the water temp sender. -If you want the carbon fiber dash inserts too lets say $250 oboSOLD

I also have a new apexi rev-speed meter- $125

And the SAFC is used, I had it in my old civic and it was working fine when I took it out so I know it works- $150SOLD

grenade shift **** (was a real grenade)- $40 obo

battery relocation kit with box/ wires and connections and extra maxi-fuses for up front (I put em in the stock fuse box) $50

Stock seats and stock door panels- free if you pick em up

2 M/T drag ET slicks (15x twenty something Ill look later) mounted on wheels that fit the 240sx lug pattern- 4x114 right??? - $150 obo - used but still have plenty of passes left on em

I have all the exterior lights except the corner lights and headlights- make an offer

The rear end is a VLSD with new synthetic fluid, make an offer on it but you have to pick it up

Theres all kinds of small parts, belts, P/S stuff, interior peices, 300zx fuel filter, some guages... Ill get to that later just ask and Ill see if I have it

Again- I will get good pics of everything and start removing it all from the car this weekend, but PM me if you are interested in anything so I can get to it first. I take paypal.

I am located near Hilton Head, SC (45 minutes north of Savannah, GA)

Thanks for looking, Jason

these are the pics I have now. Ill take more when I start getting everything taken off this weekend:



















Modified by TurboCoop at 12:39 PM 5/12/2008


Modified by TurboCoop at 7:50 PM 5/13/2008


Modified by TurboCoop at 11:27 AM 5/14/2008


Modified by TurboCoop at 4:01 PM 5/16/2008


Modified by TurboCoop at 8:11 PM 6/1/2008

 

 

 

 

have you sold the motor swap yet? if not, how much are you looking to get for it?

 

PMd you

 

paypal you the money downpipe,topmount and oilreturn and feed line and fitting let me know when you shipped it out and get the tracking thanks

 

BUMP still a bunch of stuff for sale

 

wassup remember me i bought the manifold from you i was wonder if you still have the injector and mafs? let me know thanks